SSW-106-22-G-D Equivalent & Substitute Parts

Part Overview

The SSW-106-22-G-D is a 12-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated forked contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 1006 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, enabling design flexibility and supply chain optimization.

Substiute Parts

SSW-106-22-G-D

Samtec Inc.In Stock: 1042SSW-106-22-G-D Datasheet

Current PartRFQ

SSW-106-02-G-D

Samtec Inc.In Stock: 1606SSW-106-02-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-106-22-G-D and SSW-106-02-G-D are substitutable based on identical electrical and mechanical specifications within the SSW series. Substitution is valid when the following parameters match:

• Connector type (Receptacle)
• Number of positions (12)
• Pitch spacing (0.100" / 2.54mm)
• Row configuration (2 rows at 0.100" spacing)
• Contact type (Forked)
• Mounting method (Through Hole)
• Termination type (Solder)
• Contact finish (Gold)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance (ROHS3)

Both parts share the same base product number (SSW-106) and maintain full compatibility across all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-22-G-D and SSW-106-02-G-D are active production parts with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on inventory availability and lead time requirements. The SSW-106-02-G-D currently maintains higher stock levels (1587 units versus 1006 units), which may provide supply chain advantages for high-volume applications. Both parts are functionally equivalent and maintain identical electrical performance, mechanical dimensions, and environmental operating specifications.

Frequently Asked Questions (FAQ)

Q: Are SSW-106-22-G-D and SSW-106-02-G-D fully interchangeable?

A: Yes. Both parts share identical electrical and mechanical specifications, including connector type, position count, pitch spacing, contact configuration, current rating, and operating temperature range. They are direct substitutes within the SSW series.

Q: What determines substitutability for SSW series rectangular connectors?

A: Substitutability is determined by matching connector type, number of positions, mating pitch, row configuration, contact type, mounting method, termination type, contact finish, current rating, operating temperature range, and compliance certifications. All these parameters are identical between the two parts.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-106-22-G-D and SSW-106-02-G-D are ROHS3 compliant and carry UL94 V-0 flammability ratings. They meet identical regulatory and safety requirements.

Q: Is there a difference in contact finish or plating specifications?

A: No. Both parts feature gold-plated forked contacts with identical mating finish thickness (20.0µin / 0.51µm) and post finish thickness (3.00µin / 0.076µm). Contact material, shape, and configuration are identical.

Q: Can these connectors be used in the same PCB layout?

A: Yes. Both parts have identical through-hole mounting specifications, insulation height (0.335" / 8.51mm), and contact post length (0.194" / 4.93mm). PCB footprints and assembly procedures are identical.