SSW-106-02-F-P-RA Equivalent & Substitute Parts

Part Overview

The SSW-106-02-F-P-RA is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features a 0.100" (2.54mm) pitch, through-hole right-angle mounting, and gold-plated mating contacts rated for 4.7A per contact. The product is active and widely used in applications requiring reliable push-pull fastening and solder termination. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series.

Substiute Parts

SSW-106-02-F-P-RA

Samtec Inc.In Stock: 1203SSW-106-02-F-P-RA Datasheet

Current PartRFQ

SSW-106-02-F-S-RA

Samtec Inc.In Stock: 745SSW-106-02-F-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-106-02-F-P-RA and SSW-106-02-F-S-RA are functionally equivalent based on the following critical parameters:

• Both are 6-position receptacle connectors with 0.100" (2.54mm) mating pitch
• Both feature through-hole right-angle mounting with solder termination
• Both maintain identical current rating of 4.7A per contact
• Both use gold-plated mating contacts with 3.00µin (0.076µm) thickness
• Both operate across the same temperature range: -55°C ~ 125°C
• Both employ Liquid Crystal Polymer (LCP) insulation material
• Both are ROHS3 compliant and carry EAR99 ECCN classification

The substitution is valid when connector position count, pitch spacing, mounting orientation, and electrical ratings are preserved.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-02-F-P-RA and SSW-106-02-F-S-RA are active products with identical ROHS3 compliance and regulatory classification. Selection between these parts should be based on inventory availability and lead time requirements, as all electrical and mechanical specifications are equivalent. Both connectors meet UL94 V-0 flammability standards and are suitable for applications requiring push-pull fastening in board-to-board or cable configurations.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-02-F-S-RA be used as a direct replacement for SSW-106-02-F-P-RA?

A: Yes. Both connectors share identical electrical ratings, mechanical dimensions, mounting configuration, and contact specifications. The 6-position, 0.100" pitch, through-hole right-angle design is preserved across both part numbers.

Q: Are there differences in contact material or finish between these parts?

A: No. Both parts use phosphor bronze contacts with gold plating at 3.00µin (0.076µm) thickness on mating surfaces and tin finish on post surfaces.

Q: What is the current-carrying capacity of these connectors?

A: Both connectors are rated for 4.7A per contact, supporting applications requiring moderate current distribution across six positions.

Q: Do both parts operate across the same temperature range?

A: Yes. Both SSW-106-02-F-P-RA and SSW-106-02-F-S-RA operate from -55°C to 125°C, making them suitable for industrial and extended-temperature applications.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, carry EAR99 ECCN classification, and share identical HTSUS coding (8536.69.4040).

Q: What mounting method do these connectors use?

A: Both connectors employ through-hole solder termination with right-angle board mounting, requiring PCB footprints compatible with 0.100" (2.54mm) pitch spacing.