SSW-106-01-T-P-LL Equivalent & Substitute Parts

Part Overview

The SSW-106-01-T-P-LL is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features tin-plated forked contacts, kinked pin solder termination, and push-pull fastening. The part is Active in product status with 867 units in stock. Substitute parts are identified when identical electrical and mechanical parameters are maintained across connector position count, pitch, contact material, termination type, and operating specifications.

Substiute Parts

SSW-106-01-T-P-LL

Samtec Inc.In Stock: 936SSW-106-01-T-P-LL Datasheet

Current PartRFQ

SSW-106-01-T-S-LL

Samtec Inc.In Stock: 838SSW-106-01-T-S-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-106-01-T-P-LL has one identified substitute: SSW-106-01-T-S-LL. Substitution is valid based on the following criteria:

Both parts maintain identical specifications across all critical parameters:

• 6-position receptacle configuration
• 0.100" (2.54mm) mating pitch
• Forked contact type with phosphor bronze material
• Kinked pin solder termination
• Tin contact finish on mating surfaces
• 4.7A per contact current rating
• -55°C to 105°C operating temperature range
• Liquid Crystal Polymer insulation with UL94 V-0 flammability rating
• ROHS3 compliance and Active product status

The parts differ only in fastening mechanism designation within the SSW-106 base product family, with both supporting push-pull fastening and board-to-board or cable applications.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-01-T-P-LL and SSW-106-01-T-S-LL are Active products with full ROHS3 compliance and UL94 V-0 material certification. Selection between these parts should be based on inventory availability and supply chain requirements. The SSW-106-01-T-P-LL maintains higher stock levels at 867 units compared to 785 units for the substitute. Both parts meet identical electrical and mechanical specifications for 6-position, 0.100" pitch receptacle applications with 4.7A per contact current capacity and -55°C to 105°C operating range.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-01-T-S-LL be used as a direct replacement for SSW-106-01-T-P-LL?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters including connector type, position count, pitch, contact material, termination method, and operating specifications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters remain identical: 6-position receptacle configuration, 0.100" (2.54mm) mating pitch, forked phosphor bronze contacts, kinked pin solder termination, tin contact finish, 4.7A per contact current rating, -55°C to 105°C operating temperature, and Liquid Crystal Polymer insulation with UL94 V-0 rating.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance status and UL94 V-0 material flammability certification.

Q: What is the difference between the part numbers if they are equivalent?

A: The parts differ only in fastening mechanism designation within the SSW-106 base product family. Both support push-pull fastening for board-to-board or cable applications.

Q: Which part should be selected based on availability?

A: SSW-106-01-T-P-LL is recommended for immediate availability with 867 units in stock. SSW-106-01-T-S-LL is available as an alternative with 785 units in stock.