SSW-106-01-T-P Equivalent & Substitute Parts

Part Overview

The SSW-106-01-T-P is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features tin-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 966 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the SSW series, enabling direct functional replacement in applications where connector footprint and contact characteristics remain constant.

Substiute Parts

SSW-106-01-T-P

Samtec Inc.In Stock: 1044SSW-106-01-T-P Datasheet

Current PartRFQ

SSW-106-01-T-S

Samtec Inc.In Stock: 2136SSW-106-01-T-S Datasheet

SimilarRFQ

SSW-106-01-TM-S

Samtec Inc.In Stock: 1045SSW-106-01-TM-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-106-01-T-P is determined by strict equivalence across the following critical parameters:

• 6-position configuration with 0.100" (2.54mm) mating pitch
• Forked contact type with phosphor bronze material
• Tin contact finish on both mating and post surfaces
• Through-hole solder termination with push-pull fastening
• Liquid Crystal Polymer insulation with UL94 V-0 rating
• 4.7A per contact current rating
• Operating temperature range of -55°C ~ 105°C
• ROHS3 compliance and EAR99 export classification

The identified substitutes (SSW-106-01-T-S and SSW-106-01-TM-S) maintain identical electrical and mechanical specifications across all these parameters, differing only in packaging configuration or minor contact post variations that do not affect functional performance in equivalent applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSW-106-01-T-P, SSW-106-01-T-S, and SSW-106-01-TM-S—maintain active product status with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts is based on inventory availability and packaging configuration requirements rather than functional performance differences. The SSW-106-01-T-S offers the highest inventory level at 2057 units, while SSW-106-01-TM-S provides an alternative with 1021 units in stock. All parts are suitable for applications requiring 6-position, 0.100" pitch receptacle connectors with tin-plated forked contacts and push-pull fastening within the specified temperature and current operating ranges.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-01-T-S be used as a direct replacement for SSW-106-01-T-P?

A: Yes. Both parts share identical electrical and mechanical specifications, including 6-position configuration, 0.100" mating pitch, forked tin-plated contacts, 4.7A current rating, and -55°C ~ 105°C operating temperature range. Functional compatibility is maintained across all specified parameters.

Q: What is the difference between SSW-106-01-T-P and SSW-106-01-TM-S?

A: Both parts maintain equivalent electrical and mechanical characteristics. The designation difference reflects packaging or contact post configuration variations within the SSW series that do not affect functional performance in equivalent board-to-board or cable connector applications.

Q: Are all three parts ROHS3 compliant?

A: Yes. SSW-106-01-T-P, SSW-106-01-T-S, and SSW-106-01-TM-S are all ROHS3 compliant with EAR99 export classification and HTSUS code 8536.69.4040.

Q: What is the current rating per contact for these connectors?

A: All three parts are rated for 4.7A per contact, supporting equivalent load requirements across substitution scenarios.

Q: Do these connectors support the same operating temperature range?

A: Yes. All three parts operate across the identical temperature range of -55°C ~ 105°C with UL94 V-0 material flammability rating.

Q: Which part should be selected based on availability?

A: SSW-106-01-T-S offers the highest inventory at 2057 units, followed by SSW-106-01-TM-S at 1021 units, and SSW-106-01-T-P at 966 units. Selection should be based on project lead time requirements and packaging specifications.