SSW-106-01-TM-P Equivalent & Substitute Parts

Part Overview

The SSW-106-01-TM-P is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features tin-plated forked contacts rated for 4.7A per contact and operates across -55°C to 105°C. The part is currently active in production with 891 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the SSW series, allowing for design flexibility and supply chain optimization.

Substiute Parts

SSW-106-01-TM-P

Samtec Inc.In Stock: 991SSW-106-01-TM-P Datasheet

Current PartRFQ

SSW-106-01-T-S

Samtec Inc.In Stock: 2136SSW-106-01-T-S Datasheet

SimilarRFQ

SSW-106-01-TM-S

Samtec Inc.In Stock: 1045SSW-106-01-TM-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-106-01-TM-P are determined by equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (6)
• Pitch specification (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Contact configuration (Forked)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 105°C)
• Contact finish (Tin on both mating and post surfaces)
• Insulation material (Liquid Crystal Polymer)
• Flammability rating (UL94 V-0)
• RoHS compliance (ROHS3)

The identified substitutes SSW-106-01-T-S and SSW-106-01-TM-S maintain all these parameters, differing only in fastening type designation within the part number suffix, which does not affect electrical or mechanical compatibility for standard applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSW-106-01-TM-P, SSW-106-01-T-S, and SSW-106-01-TM-S—are active products from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: SSW-106-01-T-S offers the highest stock level at 2057 units, followed by SSW-106-01-TM-S at 1021 units, and SSW-106-01-TM-P at 891 units.
• Compliance requirements: All parts meet ROHS3 compliance and UL94 V-0 flammability standards.
• Supply chain considerations: Any of the three parts can be substituted without modification to PCB layout, mating connector specifications, or electrical performance.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-01-T-S be used as a direct replacement for SSW-106-01-TM-P?

A: Yes. Both parts share identical electrical ratings (4.7A per contact), operating temperature range (-55°C to 105°C), pitch (0.100"), position count (6), and contact configuration. The part number suffix variation does not affect functional compatibility.

Q: What is the difference between the three substitute parts?

A: The three parts are electrically and mechanically equivalent. Differences exist only in part number designation and current inventory levels. All maintain the same 6-position receptacle configuration, tin contact finish, through-hole mounting, and LCP insulation material.

Q: Are these parts interchangeable on the same PCB?

A: Yes. All three parts have identical footprints, insulation heights (0.335"), contact post lengths (0.104"), and mounting specifications. PCB layout modifications are not required when substituting between these parts.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, carry UL94 V-0 flammability ratings, and share the same ECCN (EAR99) and HTSUS classifications.

Q: Which part should be selected for new designs?

A: Any of the three parts is suitable for new designs. Selection should prioritize availability and lead time. SSW-106-01-T-S currently has the highest inventory level.