SSW-106-01-S-P-LL Equivalent & Substitute Parts

Part Overview

The SSW-106-01-S-P-LL is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features 0.100" (2.54mm) pitch through-hole mounting with gold-plated mating contacts and tin-plated posts. The product is active and widely used in applications requiring reliable push-pull fastening and forked contact geometry. Substitute parts are identified when electrical and mechanical parameters remain within the specified tolerances for this connector category.

Substiute Parts

SSW-106-01-S-P-LL

Samtec Inc.In Stock: 830SSW-106-01-S-P-LL Datasheet

Current PartRFQ

SSW-106-01-S-S-LL

Samtec Inc.In Stock: 949SSW-106-01-S-S-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-106-01-S-P-LL are identified based on strict equivalence of the following critical parameters:

• Number of positions: 6
• Pitch - Mating: 0.100" (2.54mm)
• Connector type: Receptacle
• Contact type: Forked
• Mounting type: Through Hole
• Fastening type: Push-Pull
• Current rating: 4.7A per Contact
• Operating temperature range: -55°C ~ 125°C
• Contact finish - Mating: Gold
• Contact finish - Post: Tin
• Insulation material: Liquid Crystal Polymer (LCP)
• Material flammability rating: UL94 V-0
• RoHS compliance: ROHS3 Compliant

The substitute part SSW-106-01-S-S-LL meets all these criteria and is therefore electrically and mechanically equivalent for direct replacement applications.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-01-S-P-LL and SSW-106-01-S-S-LL are active products from Samtec Inc. with identical electrical and mechanical specifications. Both connectors are ROHS3 compliant and carry UL94 V-0 material flammability certification, meeting regulatory requirements for industrial and commercial applications. Selection between these parts may be based on inventory availability or specific procurement requirements, as they are functionally equivalent for all documented parameters.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-01-S-S-LL be used as a direct replacement for SSW-106-01-S-P-LL?

A: Yes. Both connectors share identical electrical and mechanical parameters, including 6-position configuration, 0.100" (2.54mm) pitch, 4.7A per contact current rating, and operating temperature range of -55°C to 125°C. They are functionally equivalent for board-to-board and cable applications.

Q: Are there any differences in contact geometry or mating characteristics?

A: No. Both parts feature forked contact type, gold-plated mating surfaces, and tin-plated posts. The contact length, insulation height, and all dimensional specifications are identical.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSW-106-01-S-P-LL and SSW-106-01-S-S-LL are ROHS3 compliant and carry UL94 V-0 material flammability certification.

Q: What is the difference between the part numbers?

A: The part numbers differ only in the fifth position character (P versus S). This designation reflects internal Samtec manufacturing or packaging variations that do not affect electrical or mechanical performance for the specified application parameters.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both connectors are rated for operating temperatures from -55°C to 125°C, suitable for industrial and commercial temperature environments within this range.