SSW-106-01-S-P Equivalent & Substitute Parts

Part Overview

The SSW-106-01-S-P is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated mating contacts, tin-plated posts, and is rated for 4.7A per contact with an operating temperature range of -55°C to 125°C. The part is currently active in production with 853 units in stock. Substitute parts are identified when electrical and mechanical parameters remain identical, ensuring direct interchangeability in circuit designs without performance degradation.

Substiute Parts

SSW-106-01-S-P

Samtec Inc.In Stock: 882SSW-106-01-S-P Datasheet

Current PartRFQ

SSW-106-01-S-S

Samtec Inc.In Stock: 2226SSW-106-01-S-S Datasheet

SimilarRFQ

SSW-106-01-SM-S

Samtec Inc.In Stock: 774SSW-106-01-SM-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-106-01-S-P are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

• Identical connector type (Receptacle)
• Identical number of positions (6)
• Identical pitch specification (0.100" / 2.54mm)
• Identical mounting method (Through Hole)
• Identical contact configuration (Forked contacts)
• Identical contact finish specifications (Gold mating, Tin post)
• Identical current rating (4.7A per contact)
• Identical operating temperature range (-55°C ~ 125°C)
• Identical insulation material (Liquid Crystal Polymer)
• Identical flammability rating (UL94 V-0)
• Identical RoHS compliance status (ROHS3 Compliant)

All substitute parts listed maintain these parameters without deviation, ensuring functional and mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSW-106-01-S-P, SSW-106-01-S-S, and SSW-106-01-SM-S—are active products from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain considerations:

• SSW-106-01-S-S offers the highest inventory level at 2132 units, providing optimal supply chain flexibility.
• SSW-106-01-S-P maintains 853 units in stock, suitable for standard procurement.
• SSW-106-01-SM-S has 701 units available, adequate for most applications.

All parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. No performance trade-offs exist between these alternatives.

Frequently Asked Questions (FAQ)

Q: Are SSW-106-01-S-S and SSW-106-01-SM-S direct replacements for SSW-106-01-S-P?

A: Yes. All three parts share identical electrical and mechanical parameters, including connector type, position count, pitch, contact finish, current rating, and operating temperature range. They are functionally interchangeable in circuit designs.

Q: What determines substitutability for this connector family?

A: Substitutability is determined by equivalence in connector type (receptacle), number of positions (6), mating pitch (0.100"), mounting method (through-hole), contact configuration (forked), contact finishes (gold mating / tin post), current rating (4.7A), operating temperature (-55°C to 125°C), and insulation material (LCP). Deviation in any of these parameters eliminates substitutability.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant and carry UL94 V-0 flammability certification, ensuring compliance with regulatory requirements across industrial, commercial, and consumer applications.

Q: How do the part numbers differ if the specifications are identical?

A: Part number variations within the SSW-106 base series reflect internal Samtec manufacturing or packaging designations. The differences do not affect electrical or mechanical performance in the application.

Q: Can I mix these connectors in the same assembly?

A: Yes. Since all parameters are identical, these connectors can be used interchangeably within the same assembly without performance degradation or compatibility issues.