SSW-106-01-G-P Equivalent & Substitute Parts

Part Overview

The SSW-106-01-G-P is a 6-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 678 units in stock. Substitute parts are identified when identical electrical and mechanical specifications are maintained across the connector series, enabling direct replacement in applications where component availability or inventory optimization is required.

Substiute Parts

SSW-106-01-G-P

Samtec Inc.In Stock: 757SSW-106-01-G-P Datasheet

Current PartRFQ

SSW-106-01-G-S

Samtec Inc.In Stock: 3189SSW-106-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-106-01-G-P is determined by strict equivalence across the following critical parameters:

• Connector Type & Configuration: Receptacle, 6-position, 0.100" (2.54mm) pitch
• Contact Specifications: Forked contact type, gold-plated mating surface, phosphor bronze material
• Electrical Performance: 4.7A per contact current rating
• Mechanical Interface: Through-hole solder termination, push-pull fastening
• Environmental Compliance: Operating temperature range -55°C ~ 125°C, UL94 V-0 flammability rating, ROHS3 compliance

The substitute part SSW-106-01-G-S maintains identical specifications across all critical parameters, differing only in packaging designation (suffix -S versus -P). Both parts are manufactured by Samtec Inc. within the SSW series and are functionally interchangeable in applications requiring 6-position 0.100" pitch receptacle connectors with gold-plated forked contacts.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-106-01-G-P and SSW-106-01-G-S are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and packaging requirements specific to procurement workflows. The SSW-106-01-G-S variant currently maintains higher inventory levels (3088 units) compared to SSW-106-01-G-P (678 units), making it suitable for applications requiring extended lead-time assurance. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. No performance degradation occurs when substituting between these variants in circuits designed for 6-position 0.100" pitch receptacle connectors with 4.7A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can SSW-106-01-G-S be used as a direct replacement for SSW-106-01-G-P?

A: Yes. Both parts are functionally equivalent across all electrical and mechanical parameters. The suffix designation (-P versus -S) indicates packaging type only and does not affect connector performance or compatibility.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters remain identical: connector type (receptacle), number of positions (6), mating pitch (0.100"), contact type (forked), mounting method (through-hole solder), fastening mechanism (push-pull), contact finish (gold), and current rating (4.7A per contact).

Q: Are there any compliance differences between SSW-106-01-G-P and SSW-106-01-G-S?

A: No. Both parts carry identical certifications: ROHS3 compliance, UL94 V-0 flammability rating, and EAR99 export classification. No additional testing or qualification is required when substituting between these variants.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.

Q: Are these connectors suitable for high-current applications?

A: Each contact supports 4.7A maximum current. Total circuit current capacity depends on the number of contacts utilized and circuit design. Verify total current requirements against the per-contact rating for your specific application.