SSW-105-22-S-D Equivalent & Substitute Parts

Part Overview

The SSW-105-22-S-D is a 10 Position Receptacle Connector manufactured by Samtec Inc., designed for 0.100" (2.54mm) pitch board-to-board or cable applications. This connector features through-hole solder termination, gold-plated mating contacts, and is rated for 4.7A per contact with an operating temperature range of -55°C to 125°C. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when electrical and mechanical parameters remain within the allowed specifications for this rectangular connector category.

Substiute Parts

SSW-105-22-S-D

Samtec Inc.In Stock: 780SSW-105-22-S-D Datasheet

Current PartRFQ

SSW-105-02-S-D

Samtec Inc.In Stock: 1102SSW-105-02-S-D Datasheet

MFR RecommendedRFQ

SSW-105-02-S-D

Samtec Inc.In Stock: 1102SSW-105-02-S-D Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-105-22-S-D are identified based on strict equivalence of the following critical parameters:

• Connector Type: Receptacle
• Number of Positions: 10
• Pitch - Mating: 0.100" (2.54mm)
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish - Mating: Gold
• Current Rating: 4.7A per Contact
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• Insulation Material: Liquid Crystal Polymer (LCP)
• Contact Type: Forked
• Base Product Number: SSW-105

The substitute part SSW-105-02-S-D maintains identical electrical and mechanical specifications across all critical parameters, ensuring direct functional equivalence within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-105-22-S-D and SSW-105-02-S-D are Active product status connectors from Samtec Inc. within the SSW series. Selection between these parts should be based on inventory availability and supply chain requirements, as both maintain identical electrical and mechanical specifications. Both parts are ROHS3 compliant and carry EAR99 ECCN classification. The SSW-105-02-S-D currently maintains higher inventory levels (1028 Pcs) compared to the SSW-105-22-S-D (700 Pcs), which may influence procurement decisions for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Are SSW-105-22-S-D and SSW-105-02-S-D directly interchangeable?

A: Yes. Both connectors share identical electrical and mechanical parameters including connector type, position count, pitch, row spacing, mounting type, termination method, contact finish, current rating, and operating temperature range. They are functionally equivalent within the SSW series.

Q: What determines substitution eligibility for this connector category?

A: Substitution is based on equivalence across critical parameters: 10-position receptacle configuration, 0.100" (2.54mm) pitch and row spacing, through-hole solder termination, gold-plated mating contacts rated for 4.7A per contact, -55°C to 125°C operating range, and UL94 V-0 flammability rating.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, EAR99 ECCN classification, and HTSUS coding. Both are manufactured by Samtec Inc. and carry Active product status.

Q: What is the difference between SSW-105-22-S-D and SSW-105-02-S-D part numbers?

A: The part number suffix variation reflects internal Samtec product line differentiation. All specified electrical and mechanical parameters remain identical between these variants.

Q: Can these connectors be used in applications requiring high current or extended temperature ranges?

A: These connectors are rated for 4.7A per contact and operate within -55°C to 125°C. Application suitability depends on specific circuit requirements and must be evaluated against these rated parameters.