SSW-105-22-G-D-VS-N Equivalent & Substitute Parts

Part Overview

The SSW-105-22-G-D-VS-N is a 10-position receptacle connector manufactured by Samtec Inc., designed for surface mount board-to-board or cable applications. This connector features a 0.100" (2.54mm) pitch with gold-plated forked contacts and push-pull fastening. The part is currently active in production with 956 units in stock. Alternative part numbers may be required due to inventory availability, procurement lead times, or specific project sourcing requirements.

Substiute Parts

SSW-105-22-G-D-VS-N

Samtec Inc.In Stock: 1043SSW-105-22-G-D-VS-N Datasheet

Current PartRFQ

SSW-105-22-G-D-VS

Samtec Inc.In Stock: 1423SSW-105-22-G-D-VS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-105-22-G-D-VS-N is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (10)
• Pitch specification (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Surface Mount)
• Contact type (Forked)
• Contact finish (Gold)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The identified substitute part SSW-105-22-G-D-VS meets all critical electrical and mechanical parameters required for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

Both the SSW-105-22-G-D-VS-N and SSW-105-22-G-D-VS are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Both parts are ROHS3 compliant and carry UL94 V-0 flammability certification. The substitute part SSW-105-22-G-D-VS offers higher inventory availability (1317 units versus 956 units), making it suitable for high-volume procurement scenarios. Selection between these parts should be based on project inventory requirements and supply chain considerations, as both parts are functionally equivalent for all specified applications.

Frequently Asked Questions (FAQ)

Q: Can SSW-105-22-G-D-VS be used as a direct replacement for SSW-105-22-G-D-VS-N?

A: Yes. Both parts share identical electrical and mechanical parameters including connector type, position count, pitch, mounting configuration, contact materials, and current ratings. They are functionally equivalent for all applications.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters match: connector type (Receptacle), number of positions (10), mating pitch (0.100" / 2.54mm), number of rows (2), row spacing (0.100" / 2.54mm), mounting type (Surface Mount), contact type (Forked), contact finish (Gold), current rating (4.7A per Contact), operating temperature range (-55°C ~ 125°C), and compliance certifications (UL94 V-0, ROHS3).

Q: Are there any differences in packaging or handling between these parts?

A: Both parts are supplied in tube packaging with identical moisture sensitivity level (MSL 1 - Unlimited), indicating no special storage or handling requirements beyond standard component handling practices.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on procurement availability and supply chain lead times. The substitute part SSW-105-22-G-D-VS currently has higher inventory availability.

Q: Do these parts require any special PCB layout considerations?

A: Both parts are surface mount connectors with identical footprint specifications. PCB layout requirements are identical for both parts.