SSW-105-03-G-P Equivalent & Substitute Parts

Part Overview

The SSW-105-03-G-P is a 5-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 752 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

SSW-105-03-G-P

Samtec Inc.In Stock: 822SSW-105-03-G-P Datasheet

Current PartRFQ

SSW-105-03-G-S

Samtec Inc.In Stock: 905SSW-105-03-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-105-03-G-P has one identified substitute: SSW-105-03-G-S. Both parts share the same base product number (SSW-105) and are classified within the same series. Substitution eligibility is determined by the following critical parameters:

• Connector type and position count (5-position receptacle)
• Mating pitch (0.100" / 2.54mm)
• Contact configuration (forked contacts, gold finish)
• Mounting method (through-hole, solder termination)
• Fastening mechanism (push-pull)
• Electrical performance (4.7A per contact)
• Operating temperature range (-55°C ~ 125°C)
• Compliance certifications (UL94 V-0, ROHS3)

The substitute part maintains electrical and mechanical compatibility across all specified parameters, enabling direct substitution in applications requiring the SSW-105 series connector.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-105-03-G-P and SSW-105-03-G-S are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. The SSW-105-03-G-S currently maintains higher inventory levels (893 units versus 752 units), which may provide supply chain advantages for high-volume applications. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting equivalent regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can SSW-105-03-G-S be used as a direct replacement for SSW-105-03-G-P?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including connector type, position count, pitch, contact configuration, current rating, and operating temperature range. Direct substitution is supported without design modification.

Q: What is the difference between SSW-105-03-G-P and SSW-105-03-G-S?

A: The parts are functionally equivalent. The difference in the part number suffix (P versus S) reflects internal Samtec manufacturing or packaging designations. All electrical and mechanical characteristics remain identical.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-105-03-G-P and SSW-105-03-G-S are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the current rating for these connectors?

A: Both parts are rated for 4.7A per contact, supporting applications requiring this current capacity across the 5-position configuration.

Q: What is the operating temperature range?

A: Both parts operate across -55°C to 125°C, suitable for industrial and extended temperature applications.

Q: Are these connectors suitable for through-hole PCB assembly?

A: Yes. Both parts feature through-hole mounting with solder termination, compatible with standard PCB assembly processes.