SSW-105-01-TM-D Equivalent & Substitute Parts

Part Overview

The SSW-105-01-TM-D is a 10-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole solder-terminated connector features forked contacts with tin plating and operates across -55°C to 105°C. The part is currently active in production with 952 units in stock.

Identifying equivalent and substitute parts is necessary when addressing supply chain constraints, packaging requirements, or inventory optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

SSW-105-01-TM-D

Samtec Inc.In Stock: 969SSW-105-01-TM-D Datasheet

Current PartRFQ

SSW-105-01-T-D

Samtec Inc.In Stock: 3323SSW-105-01-T-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-105-01-T-D qualifies as a direct substitute for the SSW-105-01-TM-D based on the following critical parameters:

• Connector configuration: Both are 10-position receptacle connectors with identical 0.100" (2.54mm) pitch and 2-row layout
• Electrical specifications: Matching contact type (forked), contact finish (tin), and current rating (4.7A per contact)
• Mechanical compatibility: Identical mounting type (through hole), termination method (solder), and fastening type (push-pull)
• Environmental ratings: Identical operating temperature range (-55°C ~ 105°C) and material flammability rating (UL94 V-0)
• Compliance: Both are ROHS3 compliant and share the same base product number (SSW-105)

The primary difference between these parts is packaging: SSW-105-01-TM-D is supplied in tape-and-reel format, while SSW-105-01-T-D is supplied in bulk packaging.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-105-01-TM-D and SSW-105-01-T-D are active production parts with ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on packaging and inventory requirements:

• SSW-105-01-TM-D: Tape-and-reel packaging is suitable for automated assembly processes requiring component feeding through pick-and-place equipment.
• SSW-105-01-T-D: Bulk packaging provides higher inventory availability (3235 units versus 952 units) and is suitable for manual assembly or lower-volume production runs.

Both parts meet the same compliance standards (ROHS3, UL94 V-0, EAR99) and share identical electrical performance characteristics.

Frequently Asked Questions (FAQ)

Q: Are SSW-105-01-TM-D and SSW-105-01-T-D electrically interchangeable?

A: Yes. Both connectors have identical electrical specifications including 10 positions, 0.100" (2.54mm) pitch, forked tin-plated contacts, and 4.7A per contact current rating.

Q: What is the primary difference between these two part numbers?

A: The primary difference is packaging format. SSW-105-01-TM-D is supplied in tape-and-reel format, while SSW-105-01-T-D is supplied in bulk packaging. This affects handling, storage, and assembly process compatibility.

Q: Can I use SSW-105-01-T-D in place of SSW-105-01-TM-D in an automated assembly line?

A: Bulk packaging (SSW-105-01-T-D) is not compatible with automated pick-and-place equipment that requires tape-and-reel format. Manual feeding or repackaging would be required.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and share identical ECCN (EAR99) and HTSUS classifications.

Q: Are there any temperature or environmental differences between these parts?

A: No. Both parts operate across the identical temperature range of -55°C to 105°C and use the same insulation material (Liquid Crystal Polymer).