SSW-104-06-G-P Equivalent & Substitute Parts

Part Overview

The SSW-104-06-G-P is a 4-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 1058 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the same connector series, allowing for design flexibility and supply chain alternatives.

Substiute Parts

SSW-104-06-G-P

Samtec Inc.In Stock: 1088SSW-104-06-G-P Datasheet

Current PartRFQ

SSW-104-06-G-S

Samtec Inc.In Stock: 805SSW-104-06-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-104-06-G-P are identified based on strict equivalence across the following critical parameters:

• Number of positions: 4
• Pitch - Mating: 0.100" (2.54mm)
• Connector type: Receptacle
• Contact type: Forked
• Mounting type: Through Hole
• Termination: Solder
• Fastening type: Push-Pull
• Current rating: 4.7A per Contact
• Operating temperature range: -55°C ~ 125°C
• Contact finish (mating and post): Gold
• Insulation material: Liquid Crystal Polymer (LCP)
• Material flammability rating: UL94 V-0
• RoHS compliance: ROHS3 Compliant

The substitute part SSW-104-06-G-S maintains all these parameters identically, differing only in the final character designation (S versus P), which represents a packaging or configuration variant within the same SSW-104 base product family.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-104-06-G-P and SSW-104-06-G-S are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Availability: SSW-104-06-G-P has higher current inventory (1058 units) compared to SSW-104-06-G-S (706 units)
• Compliance: Both parts meet ROHS3 compliance and UL94 V-0 flammability requirements
• Application requirements: Both parts are suitable for identical applications requiring 4-position, 0.100" pitch receptacle connectors with gold plating and push-pull fastening

Frequently Asked Questions (FAQ)

Q: Can SSW-104-06-G-S be used as a direct replacement for SSW-104-06-G-P?

A: Yes. Both parts maintain identical electrical and mechanical parameters, including connector type, position count, pitch, current rating, operating temperature range, contact finish, and material specifications. The difference in part number designation (P versus S) does not affect functional compatibility.

Q: What is the difference between the P and S designations in the part number?

A: The provided specifications do not differentiate the functional or mechanical characteristics between these designations. Both parts are equivalent within the SSW-104 base product family.

Q: Are both parts RoHS compliant?

A: Yes. Both SSW-104-06-G-P and SSW-104-06-G-S are ROHS3 compliant and meet UL94 V-0 flammability requirements.

Q: What is the current rating for each contact?

A: Both parts are rated for 4.7A per contact, suitable for standard signal and low-power applications.

Q: What is the operating temperature range?

A: Both parts operate across -55°C to 125°C, supporting industrial and extended temperature applications.

Q: Are the gold contact finishes identical on both parts?

A: Yes. Both parts feature gold plating on mating contacts (20.0µin / 0.51µm) and post contacts (3.00µin / 0.076µm), providing equivalent corrosion resistance and electrical performance.