SSW-103-01-T-P-LL Equivalent & Substitute Parts

Part Overview

The SSW-103-01-T-P-LL is a 3-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features tin-plated forked contacts, kinked pin solder termination, and push-pull fastening. The component is currently active in production with 1171 units in stock. Substitute parts are identified when electrical and mechanical parameters remain identical across connector position count, pitch, contact rating, operating temperature range, and material specifications.

Substiute Parts

SSW-103-01-T-P-LL

Samtec Inc.In Stock: 1232SSW-103-01-T-P-LL Datasheet

Current PartRFQ

SSW-103-01-T-S-LL

Samtec Inc.In Stock: 982SSW-103-01-T-S-LL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The SSW-103-01-T-P-LL has one identified substitute: SSW-103-01-T-S-LL. Substitution is valid based on the following criteria:

Both parts share identical specifications across all critical parameters:

• 3-position receptacle configuration
• 0.100" (2.54mm) mating pitch
• Through-hole mounting with kinked pin solder termination
• 4.7A per contact current rating
• -55°C to 105°C operating temperature range
• Tin contact finish on mating surfaces
• Liquid Crystal Polymer insulation material
• UL94 V-0 flammability rating
• ROHS3 compliance
• Active product status from Samtec Inc.

The difference between these parts is limited to the fastening mechanism designation in the part number suffix (P versus S), which does not alter the electrical or core mechanical compatibility for standard board-to-board or cable connection applications.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-103-01-T-P-LL and SSW-103-01-T-S-LL are active products from Samtec Inc. with full ROHS3 compliance and UL94 V-0 material certification. Selection between these parts should be based on availability and supply chain requirements. The SSW-103-01-T-P-LL currently has higher inventory (1171 units) compared to SSW-103-01-T-S-LL (889 units). Both parts meet identical electrical and mechanical specifications for 3-position, 0.100" pitch receptacle connector applications with 4.7A contact rating and -55°C to 105°C operating range.

Frequently Asked Questions (FAQ)

Q: Can SSW-103-01-T-S-LL be used as a direct replacement for SSW-103-01-T-P-LL?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters including connector type, position count, pitch, current rating, operating temperature, contact finish, insulation material, and flammability rating.

Q: What is the difference between the P and S designations in the part numbers?

A: The P and S suffixes indicate different fastening mechanism variants. Both variants maintain identical electrical and mechanical compatibility for standard board-to-board and cable connection applications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status and UL94 V-0 material flammability rating.

Q: Which part should be selected based on availability?

A: SSW-103-01-T-P-LL has higher current inventory (1171 units) versus SSW-103-01-T-S-LL (889 units). Selection should align with supply chain and delivery timeline requirements.

Q: Do these connectors support the same current and temperature specifications?

A: Yes. Both parts are rated for 4.7A per contact and operate across the -55°C to 105°C temperature range.