SSW-102-01-T-P Equivalent & Substitute Parts

Part Overview

The SSW-102-01-T-P is a 2-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features forked contacts, tin plating, and is rated for 4.7A per contact with an operating temperature range of -55°C to 105°C. The part is active in production status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the SSW series, enabling direct replacement in applications where connector configuration variations are acceptable.

Substiute Parts

SSW-102-01-T-P

Samtec Inc.In Stock: 1198SSW-102-01-T-P Datasheet

Current PartRFQ

SSW-102-01-T-S

Samtec Inc.In Stock: 2289SSW-102-01-T-S Datasheet

SimilarRFQ

SSW-102-01-TM-S

Samtec Inc.In Stock: 1131SSW-102-01-TM-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSW-102-01-T-P are identified within the Samtec SSW series based on matching the following critical parameters: 2-position configuration, 0.100" (2.54mm) mating pitch, through-hole termination, forked contact type, tin contact finish, 4.7A current rating per contact, -55°C to 105°C operating temperature range, LCP insulation material, and UL94 V-0 flammability rating. Variations in fastening mechanism designation (suffix codes) do not affect core electrical or mechanical compatibility. All substitute parts maintain identical contact geometry, insulation height (0.335"), contact length (0.104"), and post finish specifications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSW-102-01-T-P, SSW-102-01-T-S, and SSW-102-01-TM-S—are active production components from Samtec Inc. with identical electrical and mechanical specifications. Selection among these parts is determined by application requirements and inventory availability. SSW-102-01-T-S offers the highest inventory level at 2265 pieces. SSW-102-01-TM-S provides 1093 pieces in stock. SSW-102-01-T-P maintains 1150 pieces. All parts meet ROHS3 compliance and UL94 V-0 flammability requirements, suitable for applications requiring regulatory certification. The suffix designation differences reflect fastening mechanism variations that do not impact core connector performance or compatibility with mating components.

Frequently Asked Questions (FAQ)

Q: Can SSW-102-01-T-S be used as a direct replacement for SSW-102-01-T-P? A: Yes. Both parts share identical electrical ratings (4.7A per contact), mechanical dimensions (0.100" pitch, 0.335" insulation height, 0.104" contact length), operating temperature range (-55°C to 105°C), and material specifications (LCP insulation, phosphor bronze contacts, tin finish). The suffix variation does not affect functional compatibility.

Q: What is the difference between SSW-102-01-T-P and SSW-102-01-TM-S? A: The parts are electrically and mechanically equivalent. Differences are limited to fastening mechanism designation indicated by the suffix codes. All core parameters—contact count, pitch, current rating, temperature range, and material composition—are identical.

Q: Are all three parts ROHS3 compliant? A: Yes. SSW-102-01-T-P, SSW-102-01-T-S, and SSW-102-01-TM-S are all ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: Can these connectors be used interchangeably in the same PCB design? A: Yes, provided the PCB layout accommodates the through-hole mounting pattern. All three parts maintain identical pitch (0.100"), insulation height (0.335"), and contact geometry, enabling direct substitution without design modification.

Q: What is the current rating per contact? A: All three parts are rated for 4.7A per contact, supporting applications requiring this current capacity across the 2-position configuration.