SSW-102-01-G-P Equivalent & Substitute Parts

Part Overview

The SSW-102-01-G-P is a 2-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, solder termination, and push-pull fastening. The part is currently active in production with 994 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are maintained across the same connector series, enabling design flexibility and supply chain continuity.

Substiute Parts

SSW-102-01-G-P

Samtec Inc.In Stock: 1073SSW-102-01-G-P Datasheet

Current PartRFQ

SSW-102-01-G-S

Samtec Inc.In Stock: 1213SSW-102-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSW-102-01-G-P is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (2)
• Pitch specification (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Contact finish (Gold)
• Current rating (4.7A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Flammability rating (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSW-102-01-G-S qualifies as a direct substitute based on identical specifications across all critical electrical and mechanical parameters within the SSW series.

Parameter Comparison

Engineering Selection Recommendations

Both SSW-102-01-G-P and SSW-102-01-G-S are active production parts with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts may be based on inventory availability: SSW-102-01-G-P has 994 units in stock, while SSW-102-01-G-S has 1116 units in stock. Both parts meet identical electrical and mechanical specifications and are suitable for equivalent circuit applications.

Frequently Asked Questions (FAQ)

Q: Can SSW-102-01-G-S be used as a direct replacement for SSW-102-01-G-P?

A: Yes. Both parts are identical in connector type, position count, pitch, mounting method, contact finish, current rating, operating temperature, and flammability rating. They are functionally interchangeable within the SSW series.

Q: What determines substitution eligibility for this connector?

A: Substitution is valid when the following parameters match: 2-position receptacle configuration, 0.100" (2.54mm) pitch, through-hole mounting, gold contact finish, 4.7A per contact current rating, -55°C to 125°C operating range, and UL94 V-0 flammability rating.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant and carry identical UL94 V-0 flammability certification. Both are active production parts with no known restrictions.

Q: What is the difference between SSW-102-01-G-P and SSW-102-01-G-S?

A: The provided specifications indicate these parts are electrically and mechanically equivalent. The suffix designation (P vs. S) may indicate packaging or internal configuration differences not specified in the technical parameters provided.