SST-06-IRD-B80-Q810 Equivalent & Substitute Parts

Part Overview

The SST-06-IRD-B80-Q810 is an infrared emitter manufactured by Luminus Devices Inc., designed for applications requiring 815nm wavelength emission at 3V forward voltage with 1A maximum DC forward current. This part is classified as obsolete, necessitating identification of active equivalent models to maintain design continuity and ensure supply chain availability. Substitute parts must maintain compatibility across electrical characteristics, mechanical form factor, and thermal specifications.

Substiute Parts

SST-06-IRD-B80-Q810

Luminus Devices Inc.In Stock: 802SST-06-IRD-B80-Q810 Datasheet

Current PartRFQ

SST-10-IRD-B130H-S810

Luminus Devices Inc.In Stock: 3840SST-10-IRD-B130H-S810 Datasheet

SimilarRFQ

SST-10-IRD-B90H-S810

Luminus Devices Inc.In Stock: 1762SST-10-IRD-B90H-S810 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SST-06-IRD-B80-Q810 are identified based on the following criteria:

Mandatory Compatibility Parameters:

• Wavelength: 815nm (primary optical specification)
• Package / Case: 1414 (3535 Metric) (mechanical compatibility)
• Mounting Type: Surface Mount (assembly compatibility)
• Operating Temperature: 115°C (TJ) (thermal envelope)
• RoHS Status: ROHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 3 (168 Hours) (handling requirement)

Allowable Variation Parameters:

• Current - DC Forward (If) (Max): Substitute parts may exceed the original 1A specification, provided the design accommodates higher current capability
• Voltage - Forward (Vf) (Typ): Substitute parts maintain 3V specification
• Radiant Intensity (Ie): Substitute parts may vary from 680mW/sr @ 1A, as long as optical output meets application requirements
• Viewing Angle: Substitute parts may differ from 90°, depending on application field-of-view requirements

The SST-10-IRD series represents the active product line replacement for the obsolete SST-06-IRD series, maintaining identical package geometry and thermal specifications while offering enhanced current handling and optical performance.

Parameter Comparison

Engineering Selection Recommendations

SST-10-IRD-B90H-S810 is the primary substitute for SST-06-IRD-B80-Q810. This part maintains identical viewing angle (90°), wavelength (815nm), and forward voltage (3V) specifications. The increased maximum forward current (1.5A vs. 1A) and higher radiant intensity (770mW/sr @ 1A Typ vs. 680mW/sr @ 1A) provide enhanced optical performance within the same thermal and mechanical envelope. Product status is active with full ROHS3 compliance and REACH unaffected designation.

SST-10-IRD-B130H-S810 serves as an alternative substitute when wider viewing angle (130° vs. 90°) is acceptable for the application. This part shares identical package geometry, mounting type, and thermal specifications. The 810nm wavelength represents a minor deviation from the original 815nm specification. Maximum forward current is 1.5A. Product status is active with full ROHS3 compliance and REACH unaffected designation.

Both substitute parts are manufactured by Luminus Devices Inc., ensuring design continuity and supply chain reliability. Selection between the two substitutes depends on application-specific viewing angle requirements.

Frequently Asked Questions (FAQ)

Q: Can SST-10-IRD-B90H-S810 be used as a direct replacement for SST-06-IRD-B80-Q810?

A: Yes. Both parts share identical package geometry (1414 / 3535 Metric), mounting type (Surface Mount), operating temperature (115°C TJ), and forward voltage (3V). The SST-10-IRD-B90H-S810 maintains the same 90° viewing angle and 815nm wavelength. The increased current rating (1.5A vs. 1A) and higher radiant intensity represent performance enhancements compatible with existing designs.

Q: What is the difference between SST-10-IRD-B90H-S810 and SST-10-IRD-B130H-S810?

A: The primary difference is viewing angle: SST-10-IRD-B90H-S810 provides 90° viewing angle with 815nm wavelength, while SST-10-IRD-B130H-S810 provides 130° viewing angle with 810nm wavelength. Both share identical package, mounting type, and thermal specifications. Selection depends on application field-of-view requirements.

Q: Are there packaging differences between the main part and substitutes?

A: The main part (SST-06-IRD-B80-Q810) does not specify packaging format. Both substitute parts (SST-10-IRD-B90H-S810 and SST-10-IRD-B130H-S810) are supplied in Tape & Reel (TR) format. Verify packaging compatibility with assembly equipment and procurement requirements.

Q: Do the substitute parts meet the same compliance standards?

A: Yes. Both SST-10-IRD-B90H-S810 and SST-10-IRD-B130H-S810 are ROHS3 compliant with MSL 3 (168 Hours) rating, matching the original part specifications. The SST-10 series parts carry REACH unaffected designation, confirming regulatory compliance.

Q: What is the wavelength tolerance between 810nm and 815nm?

A: The SST-06-IRD-B80-Q810 specifies 815nm, while SST-10-IRD-B130H-S810 specifies 810nm. This represents a 5nm difference. Application compatibility depends on optical filter specifications and detector sensitivity. SST-10-IRD-B90H-S810 maintains the original 815nm specification.