SSRH7H-M20016 Common Mode Choke Equivalent & Substitute Parts

Part Overview

The SSRH7H-M20016 is a 2-line common mode choke manufactured by KEMET, designed for through-hole mounting applications. This component features 1.6 mH inductance at 10 kHz with a 2A maximum current rating and 90 mOhm DC resistance. The part is currently active in production status and complies with RoHS3 and REACH regulations.

Substitute parts are identified when design requirements allow for variations in inductance, current rating, or DC resistance while maintaining compatibility with the through-hole mounting configuration, 2-line topology, and operating temperature range of -25°C to 120°C.

Substiute Parts

SSRH7H-M20016

KEMETIn Stock: 981SSRH7H-M20016 Datasheet

Current PartRFQ

SSR10HS-22026

KEMETIn Stock: 874SSR10HS-22026 Datasheet

Parametric EquivalentRFQ

SSRH7HS-M20013

KEMETIn Stock: 1591SSRH7HS-M20013 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSRH7H-M20016 are qualified based on the following criteria:

Primary Substitution Parameters:

• Number of Lines: Must remain 2-line configuration
• Mounting Type: Must be Through Hole
• Package / Case: Must be Vertical, 4 PC Pin
• Voltage Rating - AC: Must be 250V or higher
• Operating Temperature: Must support -25°C ~ 120°C range
• Product Status: Must be Active

Secondary Variation Parameters:

• Inductance @ 10 kHz: Allowed to vary based on circuit design tolerance
• Current Rating (Max): Allowed to vary; higher ratings provide additional margin
• DC Resistance (DCR): Allowed to vary within acceptable power dissipation limits

The identified substitute parts maintain the core electrical and mechanical compatibility while allowing for inductance and current rating variations that may be acceptable depending on specific circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

SSRH7H-M20016 (Primary Part) This part is the specified component and remains the first choice when exact electrical parameters are required. It is Active in production status with full RoHS3 compliance and REACH unaffected designation.

SSR10HS-22026 (Substitute Option) This part provides higher inductance (2.6 mH vs. 1.6 mH) and increased current rating (2.2A vs. 2A). The DC resistance is slightly higher at 100 mOhm. This substitute is suitable for applications where higher inductance filtering is beneficial and the circuit design can accommodate the increased inductance value. Product status is Active with ROHS3 compliance.

SSRH7HS-M20013 (Substitute Option) This part provides lower inductance (1.3 mH vs. 1.6 mH) with improved DC resistance (80 mOhm vs. 90 mOhm). The current rating remains at 2A. This substitute is suitable for applications where lower inductance is acceptable and reduced power dissipation is desired. Product status is Active with ROHS3 compliance. Physical dimensions match the primary part exactly.

All three parts maintain identical voltage ratings, operating temperature ranges, mounting configurations, and regulatory compliance status.

Frequently Asked Questions (FAQ)

Q: Can SSR10HS-22026 be used as a direct replacement for SSRH7H-M20016?

A: SSR10HS-22026 is mechanically and electrically compatible in terms of mounting, pin configuration, voltage rating, and temperature range. However, the inductance is higher (2.6 mH vs. 1.6 mH) and current rating is higher (2.2A vs. 2A). Substitution is valid only if the circuit design can accommodate the increased inductance value.

Q: What is the difference between SSRH7HS-M20013 and SSRH7H-M20016?

A: Both parts are from the same SSRH7H-M series with identical physical dimensions and mounting characteristics. The primary difference is inductance: SSRH7HS-M20013 provides 1.3 mH while SSRH7H-M20016 provides 1.6 mH. SSRH7HS-M20013 also has lower DC resistance (80 mOhm vs. 90 mOhm).

Q: Are all substitute parts RoHS3 compliant?

A: Yes. SSRH7H-M20016, SSR10HS-22026, and SSRH7HS-M20013 are all ROHS3 compliant with REACH unaffected status.

Q: Do the substitute parts have the same physical dimensions?

A: SSRH7HS-M20013 has identical dimensions to SSRH7H-M20016 (0.709" L x 0.571" W, 0.472" height). SSR10HS-22026 has a slightly greater height (0.531" vs. 0.472"), which may affect board layout in space-constrained applications.

Q: What is the operating temperature range for all parts?

A: All three parts operate across the identical temperature range of -25°C to 120°C.

Q: Can these parts be used interchangeably in production?

A: Interchangeability depends on circuit design specifications. All parts share the same mounting type, pin configuration, voltage rating, and temperature range. Substitution is valid when inductance and current rating variations are within design tolerance.