SSR10V-30016 Equivalent & Substitute Parts Reference

Part Overview

The SSR10V-30016 is a 2-line common mode choke (CMC) manufactured by KEMET, designed for through-hole mounting applications. This component operates at 1.6 mH inductance at 10 kHz with a maximum current rating of 3A and DC resistance of 60 mOhm. The part is classified as Active product status and complies with ROHS3 and REACH Unaffected standards. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component selection flexibility across KEMET's CMC product portfolio.

Substiute Parts

SSR10V-30016

KEMETIn Stock: 1165SSR10V-30016 Datasheet

Current PartRFQ

SSHB10HS-30006

KEMETIn Stock: 1455SSHB10HS-30006 Datasheet

Parametric EquivalentRFQ

SSHB10HS-R30015

KEMETIn Stock: 1002SSHB10HS-R30015 Datasheet

Parametric EquivalentRFQ

SSR10VS-30013

KEMETIn Stock: 1603SSR10VS-30013 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSR10V-30016 are qualified based on the following criteria:

Core Electrical Parameters (Must Match):

• Number of Lines: 2
• Current Rating (Max): 3A
• DC Resistance (DCR) (Max): 60 mOhm
• Voltage Rating - AC: 250V
• Operating Temperature Range: -25°C ~ 120°C

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: Vertical, 4 PC Pin

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Variable Parameter (Application-Dependent):

• Inductance @ Frequency: 600 µH to 1.6 mH @ 10 kHz

The three identified substitute parts maintain identical electrical ratings, thermal specifications, and mechanical form factors. Inductance values vary to accommodate different filtering requirements while preserving all other critical parameters.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status and full compliance with ROHS3 and REACH Unaffected standards, ensuring regulatory alignment with the original SSR10V-30016 component.

SSHB10HS-30006 (600 µH @ 10 kHz): This substitute provides the lowest inductance value within the qualified group. Selection is appropriate for applications requiring reduced filtering impedance while maintaining identical current capacity and thermal performance.

SSHB10HS-R30015 (1.5 mH @ 10 kHz): This substitute provides inductance closest to the original part specification at 1.5 mH. Selection is appropriate for applications where inductance value is critical and minor deviation from 1.6 mH is acceptable within circuit tolerance margins.

SSR10VS-30013 (1.3 mH @ 10 kHz): This substitute provides intermediate inductance at 1.3 mH. Selection is appropriate for applications requiring inductance reduction from the original 1.6 mH specification while maintaining the SSR series form factor.

All three substitutes share identical electrical ratings (3A current, 60 mOhm DCR, 250V AC), thermal operating range (-25°C to 120°C), and mechanical mounting configuration (through-hole, vertical 4-pin package).

Frequently Asked Questions (FAQ)

Q: What determines whether a part can substitute for SSR10V-30016?

A: Substitute parts must maintain identical values for: number of lines (2), current rating (3A), DC resistance (60 mOhm), AC voltage rating (250V), operating temperature range (-25°C to 120°C), mounting type (through-hole), package configuration (vertical 4-pin), and compliance certifications (ROHS3 Compliant, REACH Unaffected). Inductance values may vary based on application requirements.

Q: Can inductance values differ between the main part and substitutes?

A: Yes. The three qualified substitutes provide inductance values of 600 µH, 1.3 mH, and 1.5 mH at 10 kHz, compared to the original 1.6 mH. Selection depends on the specific filtering requirements of the application circuit. All other electrical and mechanical parameters remain constant.

Q: Are all substitute parts from the same manufacturer?

A: Yes. All substitute parts are manufactured by KEMET, the same manufacturer as the original SSR10V-30016 component.

Q: Do the substitute parts have different physical dimensions?

A: SSHB10HS series parts (SSHB10HS-30006 and SSHB10HS-R30015) have different dimensions (22.00mm L x 17.00mm W x 15.50mm H) compared to SSR series parts (23.50mm L x 13.00mm W x 21.00mm H). SSR10VS-30013 maintains identical dimensions to the original SSR10V-30016. Physical space constraints in the application circuit may influence substitute selection.

Q: What is the inventory status of substitute parts?

A: SSHB10HS-30006 has 1379 pieces in stock, SSHB10HS-R30015 has 934 pieces in stock, and SSR10VS-30013 has 1547 pieces in stock. The original SSR10V-30016 has 1061 pieces in stock.

Q: Are all parts compliant with current environmental regulations?

A: Yes. All parts including the original SSR10V-30016 and all three substitutes are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.