SSR10V-07330 Equivalent & Substitute Parts

Part Overview

The SSR10V-07330 is a 2-line common mode choke (CMC) manufactured by KEMET, rated for 33 mH inductance at 10 kHz with a maximum current rating of 700 mA. This through-hole component operates across a temperature range of -25°C to 120°C and features a 900 mOhm maximum DC resistance. The part is ROHS3 compliant and maintains active product status.

Substitute parts are identified when equivalent electrical performance can be achieved through alternative KEMET series offerings that maintain compatibility with the same mounting configuration, voltage rating, and functional application while accommodating variations in inductance, current capacity, and DC resistance within acceptable design parameters.

Key Parameters

Parameter	Value
Manufacturer Part Number	SSR10V-07330
Manufacturer	KEMET
Series	SSR
Number of Lines	2
Inductance @ 10 kHz	33 mH
Current Rating (Max)	700 mA
DC Resistance (Max)	900 mOhm
Voltage Rating - AC	250 V
Operating Temperature	-25°C ~ 120°C
Mounting Type	Through Hole
Package / Case	Vertical, 4 PC Pin
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the SSR10V-07330 is determined by the following criteria:

Mandatory Compatibility Parameters:

Number of Lines: 2 (all substitutes must maintain 2-line configuration)
Mounting Type: Through Hole (all substitutes must be through-hole mounted)
Package / Case: Vertical, 4 PC Pin (all substitutes must use identical pin configuration)
Voltage Rating - AC: 250 V (all substitutes must support 250 V AC minimum)
Operating Temperature Range: -25°C minimum and 120°C minimum (all substitutes must meet or exceed this range)
RoHS Status: ROHS3 Compliant (all substitutes must maintain compliance)
Product Status: Active (all substitutes must be active products)

Variable Parameters Allowing Substitution:

Inductance @ 10 kHz: Range from 9.9 mH to 68 mH
Current Rating (Max): Range from 700 mA to 800 mA
DC Resistance (Max): Range from 780 mOhm to 950 mOhm
Physical Dimensions: Variations permitted within through-hole vertical mounting constraints

All identified substitute parts meet the mandatory compatibility parameters while offering alternative inductance values and current ratings suitable for applications requiring different filtering characteristics or current handling capacity.

Parameter Comparison

Part Number	Series	Inductance @ 10 kHz	Current Rating (Max)	DC Resistance (Max)	Operating Temperature	Size / Dimension (L x W)	Height (Max)
SSR10V-07330	SSR	33 mH	700 mA	900 mOhm	-25°C ~ 120°C	0.925" x 0.512" (23.50mm x 13.00mm)	0.827" (21.00mm)
SSHB10H-07120	SSHB10H	12 mH	700 mA	900 mOhm	-25°C ~ 130°C	0.866" x 0.669" (22.00mm x 17.00mm)	0.610" (15.50mm)
SSHB10HS-07099	SSHB10HS	9.9 mH	700 mA	810 mOhm	-25°C ~ 120°C	0.866" x 0.669" (22.00mm x 17.00mm)	0.610" (15.50mm)
SSHB10HS-R07230	SSHB10HS	23 mH	700 mA	810 mOhm	-25°C ~ 120°C	0.866" x 0.669" (22.00mm x 17.00mm)	0.610" (15.50mm)
SSHB21H-08262	SSHB21H	26.2 mH	800 mA	880 mOhm	-25°C ~ 120°C	1.024" x 0.906" (26.00mm x 23.00mm)	0.610" (15.50mm)
SSHB21H-R08540	SSHB21H	54 mH	800 mA	880 mOhm	-25°C ~ 120°C	1.024" x 0.906" (26.00mm x 23.00mm)	0.610" (15.50mm)
SSHB21HS-08200	SSHB21HS	20 mH	800 mA	780 mOhm	-25°C ~ 120°C	1.024" x 0.906" (26.00mm x 23.00mm)	0.610" (15.50mm)
SSHB21HS-R08410	SSHB21HS	41 mH	800 mA	780 mOhm	-25°C ~ 120°C	1.024" x 0.906" (26.00mm x 23.00mm)	0.610" (15.50mm)
SSR10H-07330	SSR	33 mH	700 mA	900 mOhm	-25°C ~ 120°C	Not specified	0.531" (13.50mm)
SSR21NH-M08680	SSR	68 mH	800 mA	800 mOhm	-25°C ~ 120°C	0.906" x 0.906" (23.00mm x 23.00mm)	0.571" (14.50mm)
SSR21NHS-M07680	SSR	68 mH	700 mA	950 mOhm	-25°C ~ 120°C	0.906" x 0.906" (23.00mm x 23.00mm)	0.571" (14.50mm)

Engineering Selection Recommendations

All identified substitute parts maintain ROHS3 compliance and active product status, ensuring regulatory alignment with the original SSR10V-07330 component. Selection among substitutes is determined by application-specific requirements for inductance value and current capacity.

For applications requiring inductance values lower than 33 mH: SSHB10HS-07099 (9.9 mH) and SSHB10HS-R07230 (23 mH) provide reduced inductance with improved DC resistance characteristics (810 mOhm maximum). These components maintain 700 mA current rating and operate across the full -25°C to 120°C temperature range.

For applications requiring inductance values near the original specification: SSHB21H-08262 (26.2 mH) and SSHB21HS-08200 (20 mH) offer inductance values proximate to 33 mH with enhanced current capacity (800 mA). SSHB21HS-08200 provides superior DC resistance performance at 780 mOhm maximum.

For applications requiring inductance values higher than 33 mH: SSHB21H-R08540 (54 mH), SSHB21HS-R08410 (41 mH), SSR21NH-M08680 (68 mH), and SSR21NHS-M07680 (68 mH) deliver increased inductance filtering capability. SSR21NH-M08680 supports 800 mA current rating with 800 mOhm DC resistance, while SSR21NHS-M07680 maintains 700 mA rating with 950 mOhm DC resistance.

For direct electrical equivalence with identical inductance: SSR10H-07330 provides identical 33 mH inductance, 700 mA current rating, and 900 mOhm DC resistance within the SSR series, with reduced height profile (0.531 inches versus 0.827 inches).

Frequently Asked Questions (FAQ)

Q: Can SSHB series components substitute for SSR series components?

A: Yes. Both SSHB and SSR series common mode chokes share identical mandatory compatibility parameters: 2-line configuration, through-hole vertical mounting with 4 PC pins, 250 V AC voltage rating, and ROHS3 compliance. Substitution is valid when inductance, current rating, and DC resistance requirements are met.

Q: What is the significance of the inductance variation among substitute parts?

A: Inductance value determines the filtering effectiveness at the operating frequency. Lower inductance values (9.9 mH to 23 mH) provide reduced filtering but lower impedance. Higher inductance values (54 mH to 68 mH) provide enhanced filtering but increased impedance. Selection depends on the specific EMI filtering requirements of the application.

Q: How does DC resistance affect component selection?

A: DC resistance (DCR) represents power dissipation in the component. Lower DCR values (780 mOhm in SSHB21HS series) reduce heat generation and power loss. Higher DCR values (950 mOhm in SSR21NHS-M07680) increase power dissipation. Selection depends on thermal constraints and acceptable power loss in the application circuit.

Q: Are there physical space constraints when substituting between different series?

A: Yes. Physical dimensions vary among series. SSHB10H and SSHB10HS components measure 0.866" x 0.669" with 0.610" height. SSHB21H and SSHB21HS components measure 1.024" x 0.906" with 0.610" height. SSR series components have different dimensional profiles. PCB layout must accommodate the selected substitute's footprint and height.

Q: What is the difference between SSHB10HS-07099 and SSHB10HS-R07230?

A: Both components are SSHB10HS series with identical 700 mA current rating and 810 mOhm DC resistance. SSHB10HS-07099 provides 9.9 mH inductance, while SSHB10HS-R07230 provides 23 mH inductance. The selection depends on required filtering characteristics at the operating frequency.

Q: Can SSR10V-07330 be replaced with SSR10H-07330?

A: Yes. SSR10H-07330 provides identical electrical specifications: 33 mH inductance, 700 mA current rating, and 900 mOhm DC resistance. The primary difference is physical height: SSR10H-07330 measures 0.531" height compared to SSR10V-07330 at 0.827" height. This substitution is valid when the reduced height profile is compatible with PCB layout constraints.

Q: What current rating should be selected for my application?

A: Select a substitute with current rating equal to or greater than the maximum continuous current in your application circuit. SSR10V-07330 and most SSHB10 series components are rated for 700 mA. SSHB21 and SSR21 series components are rated for 800 mA. Exceeding the rated current causes excessive heat generation and component failure.

Q: Are all substitute parts in active production status?

A: Yes. All identified substitute parts maintain active product status with KEMET, ensuring availability and continued manufacturing support. All components are ROHS3 compliant and REACH unaffected.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message