SSR10HS-30013 Equivalent & Substitute Parts

Part Overview

The SSR10HS-30013 is a 2-line common mode choke (CMC) manufactured by KEMET, designed for through-hole mounting applications. This component operates at 1.3 mH inductance at 10 kHz with a maximum current rating of 3A and DC resistance of 60 mOhm. The part is classified as Active product status and complies with ROHS3 and REACH Unaffected standards. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component selection flexibility for procurement, inventory management, or design optimization.

Key Parameters

Parameter	Value
Manufacturer	KEMET
Series	SSR
Number of Lines	2
Inductance @ Frequency	1.3 mH @ 10 kHz
Current Rating (Max)	3A
DC Resistance (DCR) (Max)	60 mOhm
Voltage Rating - AC	250V
Operating Temperature	-25°C ~ 120°C
Mounting Type	Through Hole
Package / Case	Vertical, 4 PC Pin
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the SSR10HS-30013 are identified based on strict alignment of the following critical parameters:

Primary Substitution Criteria:

Number of Lines: 2 (fixed requirement)
Current Rating (Max): 3A (fixed requirement)
DC Resistance (DCR) (Max): 60 mOhm (fixed requirement)
Voltage Rating - AC: 250V (fixed requirement)
Operating Temperature: -25°C ~ 120°C (fixed requirement)
Mounting Type: Through Hole (fixed requirement)
Package / Case: Vertical, 4 PC Pin (fixed requirement)
RoHS Status: ROHS3 Compliant (fixed requirement)

Variable Parameters Allowing Substitution:

Inductance @ Frequency: 600 µH to 1.5 mH @ 10 kHz
Physical dimensions (height and footprint)
Series designation (SSR or SSHB10HS)

Substitute parts maintain identical electrical performance specifications for current handling, impedance, voltage withstand, and thermal operating range. Variations in inductance value and physical package dimensions are permitted within the specified tolerance range, provided all other parameters remain constant.

Parameter Comparison

Parameter	SSR10HS-30013	SSHB10HS-30006	SSHB10HS-R30015	SSR10VS-30013
Manufacturer	KEMET	KEMET	KEMET	KEMET
Number of Lines	2	2	2	2
Inductance @ Frequency	1.3 mH @ 10 kHz	600 µH @ 10 kHz	1.5 mH @ 10 kHz	1.3 mH @ 10 kHz
Current Rating (Max)	3A	3A	3A	3A
DC Resistance (DCR) (Max)	60 mOhm	60 mOhm	60 mOhm	60 mOhm
Voltage Rating - AC	250V	250V	250V	250V
Operating Temperature	-25°C ~ 120°C	-25°C ~ 120°C	-25°C ~ 120°C	-25°C ~ 120°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	Vertical, 4 PC Pin	Vertical, 4 PC Pin	Vertical, 4 PC Pin	Vertical, 4 PC Pin
Height (Max)	0.531" (13.50mm)	0.610" (15.50mm)	0.610" (15.50mm)	0.827" (21.00mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and ROHS3 compliance, ensuring long-term availability and regulatory conformance. Selection between SSR10HS-30013 and substitute parts depends on application-specific inductance requirements and available printed circuit board space.

SSR10HS-30013 (1.3 mH @ 10 kHz): Primary specification. Compact height of 13.50 mm. Select when inductance value of 1.3 mH is required and space constraints favor minimal vertical clearance.

SSHB10HS-30006 (600 µH @ 10 kHz): Lower inductance value. Height of 15.50 mm. Select when application requires reduced inductance filtering and component footprint permits moderate height increase.

SSHB10HS-R30015 (1.5 mH @ 10 kHz): Higher inductance value. Height of 15.50 mm. Select when application requires increased inductance filtering and component footprint permits moderate height increase.

SSR10VS-30013 (1.3 mH @ 10 kHz): Identical inductance to primary part. Height of 21.00 mm. Select when inductance value of 1.3 mH is required and vertical clearance of 21.00 mm is available.

All parts share identical electrical performance for current handling (3A), impedance (60 mOhm DCR), voltage withstand (250V AC), and thermal operating range (-25°C to 120°C).

Frequently Asked Questions (FAQ)

Q: Can SSHB10HS-30006 replace SSR10HS-30013 in my application?

A: SSHB10HS-30006 is electrically compatible if your circuit design accepts 600 µH inductance instead of 1.3 mH. All other electrical parameters (3A current, 60 mOhm DCR, 250V AC rating, temperature range) are identical. Physical height increases from 13.50 mm to 15.50 mm; verify PCB clearance before substitution.

Q: What is the difference between SSR10HS-30013 and SSR10VS-30013?

A: Both parts provide 1.3 mH @ 10 kHz inductance with identical electrical specifications. The primary difference is physical package height: SSR10HS-30013 is 13.50 mm tall, while SSR10VS-30013 is 21.00 mm tall. Select based on available vertical clearance on your PCB.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. SSR10HS-30013, SSHB10HS-30006, SSHB10HS-R30015, and SSR10VS-30013 are all ROHS3 Compliant and REACH Unaffected, meeting regulatory requirements for electronic component manufacturing and use.

Q: Can I use SSHB10HS-R30015 if my design specifies 1.3 mH?

A: SSHB10HS-R30015 provides 1.5 mH @ 10 kHz, which differs from the specified 1.3 mH. Substitution is only valid if circuit design tolerates the 0.2 mH inductance increase. Verify filter performance and frequency response requirements before substitution.

Q: What are the inventory levels for each substitute part?

A: SSR10HS-30013: 973 Pcs; SSHB10HS-30006: 1379 Pcs; SSHB10HS-R30015: 934 Pcs; SSR10VS-30013: 1547 Pcs. All parts are listed as New Original In Stock.

Q: Do all substitute parts use the same 4-pin vertical package?

A: Yes. SSR10HS-30013, SSHB10HS-30006, SSHB10HS-R30015, and SSR10VS-30013 all use Vertical, 4 PC Pin package configuration, ensuring pin compatibility and through-hole mounting compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message