SSQ-150-22-S-S Equivalent & Substitute Parts

Part Overview

The SSQ-150-22-S-S is a 50-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features 0.100" (2.54mm) pitch through-hole mounting with gold-plated mating contacts and tin-plated posts. The product is currently active and widely used in applications requiring reliable interconnection with push-pull fastening and high voltage tolerance up to 465VAC and 655VDC. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative connector options within the same electrical and mechanical specifications.

Substiute Parts

SSQ-150-22-S-S

Samtec Inc.In Stock: 957SSQ-150-22-S-S Datasheet

Current PartRFQ

SSQ-150-02-S-S

Samtec Inc.In Stock: 951SSQ-150-02-S-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSQ-150-22-S-S are identified based on strict electrical and mechanical parameter equivalence within the SSQ series. The substitution criteria are:

• Connector type: Receptacle
• Number of positions: 50
• Pitch - mating: 0.100" (2.54mm)
• Number of rows: 1
• Mounting type: Through hole
• Termination: Solder
• Fastening type: Push-pull
• Contact finish - mating: Gold at 30.0µin (0.76µm)
• Insulation material: Liquid Crystal Polymer (LCP)
• Contact material: Phosphor Bronze
• Operating temperature: -55°C ~ 125°C
• Voltage rating: 465VAC, 655VDC
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant

Parts meeting all these criteria are considered direct substitutes and are interchangeable in applications where the SSQ-150-22-S-S is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the SSQ-150-22-S-S and SSQ-150-02-S-S are active products manufactured by Samtec Inc. and are fully ROHS3 compliant. The connectors are electrically and mechanically equivalent across all specified parameters, including voltage rating, operating temperature range, contact materials, and flammability certification. Selection between these parts may be based on inventory availability, lead time, or procurement requirements, as they are direct substitutes within the SSQ series. Both parts maintain the same electrical performance characteristics and physical dimensions required for board-to-board or cable interconnection applications.

Frequently Asked Questions (FAQ)

Q: Are SSQ-150-22-S-S and SSQ-150-02-S-S interchangeable?

A: Yes. Both connectors are 50-position receptacles with identical electrical and mechanical specifications, including 0.100" pitch, gold-plated mating contacts, tin-plated posts, and push-pull fastening. They are direct substitutes.

Q: What determines if a connector can substitute for the SSQ-150-22-S-S?

A: A substitute must match all key parameters: 50 positions, 0.100" (2.54mm) pitch, single row, through-hole mounting, solder termination, push-pull fastening, gold mating contact finish at 30.0µin thickness, tin post finish, LCP insulation, phosphor bronze contacts, -55°C to 125°C operating range, 465VAC/655VDC voltage rating, and UL94 V-0 flammability rating.

Q: Can I use these connectors in high-temperature applications?

A: Both connectors are rated for -55°C to 125°C operating temperature. Applications requiring operation outside this range require alternative connector selection.

Q: Are both parts RoHS compliant?

A: Yes. Both SSQ-150-22-S-S and SSQ-150-02-S-S are ROHS3 compliant.

Q: What is the voltage rating for these connectors?

A: Both connectors are rated for 465VAC and 655VDC.

Q: Do these connectors require any special handling or storage?

A: Both connectors use Liquid Crystal Polymer (LCP) insulation and are not subject to moisture sensitivity level (MSL) restrictions. Standard component storage practices apply.