SSQ-131-24-G-D Equivalent & Substitute Parts

Part Overview

The SSQ-131-24-G-D is a 62-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications. This connector features 0.100" (2.54mm) pitch mating with through-hole solder termination and push-pull fastening. The part is currently active in production with 952 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

SSQ-131-24-G-D

Samtec Inc.In Stock: 1022SSQ-131-24-G-D Datasheet

Current PartRFQ

SSQ-131-04-G-D

Samtec Inc.In Stock: 876SSQ-131-04-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-131-24-G-D is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (62)
• Pitch specification (0.100" / 2.54mm mating pitch)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Contact finish material (Gold)
• Operating temperature range (-55°C ~ 125°C)
• Voltage rating (465VAC, 655VDC)
• Flammability compliance (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSQ-131-04-G-D meets all substitution criteria and is classified as a direct equivalent within the SSQ series from Samtec Inc.

Parameter Comparison

Engineering Selection Recommendations

Both the SSQ-131-24-G-D and SSQ-131-04-G-D are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability and lead time requirements
• Current stock levels (SSQ-131-24-G-D: 952 units; SSQ-131-04-G-D: 774 units)
• Procurement cost and supplier pricing
• Design documentation and bill of materials requirements

Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification, ensuring regulatory and safety standard adherence across applications. The identical parameter set confirms full functional interchangeability in board-to-board and cable connector applications.

Frequently Asked Questions (FAQ)

Q: Are SSQ-131-24-G-D and SSQ-131-04-G-D fully interchangeable?

A: Yes. Both parts are direct equivalents with identical connector type, position count, pitch, row configuration, mounting method, termination type, fastening mechanism, contact finish, operating temperature range, voltage rating, and compliance certifications.

Q: What determines substitution eligibility for this connector series?

A: Substitution requires matching connector type (receptacle), position count (62), mating pitch (0.100"), row count (2), row spacing (0.100"), mounting type (through hole), termination (solder), fastening type (push-pull), contact finish (gold), operating temperature (-55°C to 125°C), voltage rating (465VAC/655VDC), and compliance status (UL94 V-0, ROHS3).

Q: Can I use these connectors in high-temperature applications?

A: Both parts are rated for -55°C to 125°C operating temperature. Applications requiring operation outside this range require alternative connector selection.

Q: Are there any packaging or inventory considerations?

A: Both parts are supplied in bulk packaging. Inventory levels differ: SSQ-131-24-G-D has 952 units in stock, while SSQ-131-04-G-D has 774 units. Verify current availability with your supplier for procurement planning.

Q: What is the difference between the part numbers SSQ-131-24-G-D and SSQ-131-04-G-D?

A: The numeric designations (24 vs. 04) represent internal Samtec manufacturing variants within the SSQ-131 base product line. All specified electrical and mechanical parameters are identical, confirming functional equivalence.