SSQ-114-02-T-P Equivalent & Substitute Parts

Part Overview

The SSQ-114-02-T-P is a 14-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features tin-plated forked contacts, phosphor bronze construction, and operates across -55°C to 105°C. The part maintains Active product status with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, ensuring functional interchangeability in rectangular connector applications.

Substiute Parts

SSQ-114-02-T-P

Samtec Inc.In Stock: 753SSQ-114-02-T-P Datasheet

Current PartRFQ

SSQ-114-02-T-S

Samtec Inc.In Stock: 666SSQ-114-02-T-S Datasheet

SimilarRFQ

SSQ-114-02-T-S

Samtec Inc.In Stock: 666SSQ-114-02-T-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-114-02-T-P is determined by strict alignment of the following critical parameters:

• Connector type (Receptacle)
• Number of positions (14)
• Mating pitch (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Contact configuration (Forked)
• Termination method (Solder)
• Contact finish specifications (Tin on both mating and post surfaces)
• Operating temperature range (-55°C ~ 105°C)
• Voltage rating (465VAC, 655VDC minimum)
• Flammability compliance (UL94 V-0)
• RoHS compliance status (ROHS3)

The identified substitute part SSQ-114-02-T-S meets all these criteria, confirming functional and mechanical interchangeability within the SSQ series rectangular connector family.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-114-02-T-P and SSQ-114-02-T-S maintain Active product status from Samtec Inc., ensuring continued manufacturing support and availability. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for industrial and commercial applications. The electrical specifications—465VAC and 655VDC voltage ratings—and mechanical parameters are identical across both parts, confirming direct substitution capability. Selection between these parts should be based on inventory availability and lead time requirements, as no functional or compliance differences exist.

Frequently Asked Questions (FAQ)

Q: Can SSQ-114-02-T-S replace SSQ-114-02-T-P in existing designs?

A: Yes. Both parts share identical electrical ratings (465VAC, 655VDC), mechanical dimensions (0.100" pitch, 14 positions, 0.335" insulation height), contact specifications (tin-plated forked phosphor bronze), and compliance certifications (ROHS3, UL94 V-0). Direct substitution is supported.

Q: What are the key parameters that determine substitution eligibility?

A: Critical parameters include connector type (receptacle), position count (14), mating pitch (0.100"), mounting method (through-hole solder), contact finish (tin), operating temperature range (-55°C to 105°C), voltage rating (465VAC/655VDC minimum), and flammability rating (UL94 V-0). Deviation in any of these parameters disqualifies substitution.

Q: Are there differences in packaging or moisture sensitivity between these parts?

A: Both parts are supplied in Bulk packaging. SSQ-114-02-T-P lists Moisture Sensitivity Level as Not Applicable, while SSQ-114-02-T-S specifies MSL 1 (Unlimited). This difference does not affect functional interchangeability or storage requirements for standard industrial applications.

Q: What is the base product number for these connectors?

A: Both SSQ-114-02-T-P and SSQ-114-02-T-S share the base product number SSQ-114, indicating they belong to the same connector family within the Samtec SSQ series.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both parts maintain ROHS3 compliance and carry UL94 V-0 flammability certification. Both are classified under ECCN EAR99 and HTSUS 8536.69.4040 for export and tariff purposes.