SSQ-110-24-F-S Equivalent & Substitute Parts

Part Overview

The SSQ-110-24-F-S is a 10-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The product is active and widely used in applications requiring reliable rectangular connector solutions with high voltage ratings and extended operating temperature ranges.

Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative connector options that maintain electrical and mechanical compatibility within the SSQ series.

Substiute Parts

SSQ-110-24-F-S

Samtec Inc.In Stock: 1053SSQ-110-24-F-S Datasheet

Current PartRFQ

SSQ-110-04-F-S

Samtec Inc.In Stock: 928SSQ-110-04-F-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the SSQ series is determined by strict equivalence across the following critical parameters:

• Connector Type: Receptacle configuration
• Number of Positions: 10-position contact arrangement
• Pitch - Mating: 0.100" (2.54mm) standardized spacing
• Mounting Type: Through-hole PCB mounting
• Termination Method: Solder connection
• Contact Finish - Mating: Gold plating specification
• Voltage Rating: 465VAC, 655VDC electrical specification
• Operating Temperature Range: -55°C ~ 125°C thermal specification
• Flammability Rating: UL94 V-0 material compliance
• RoHS Compliance: ROHS3 Compliant status

The SSQ-110-04-F-S qualifies as a direct substitute based on identical alignment across all critical electrical and mechanical parameters. Variations in moisture sensitivity level (MSL) and REACH status do not affect functional substitutability for this connector category.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-110-24-F-S and SSQ-110-04-F-S are active products with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory Availability: SSQ-110-24-F-S has 968 pcs in stock; SSQ-110-04-F-S has 908 pcs in stock
• Product Status: Both parts maintain active status with full manufacturer support
• Compliance Requirements: Both parts meet ROHS3 compliance and UL94 V-0 flammability standards
• Regulatory Classification: Both parts carry EAR99 export classification

No electrical or mechanical re-qualification is required when substituting between these parts within the same design application.

Frequently Asked Questions (FAQ)

Q: Can SSQ-110-04-F-S be used as a direct replacement for SSQ-110-24-F-S?

A: Yes. Both connectors share identical electrical ratings (465VAC, 655VDC), mechanical dimensions (10-position, 0.100" pitch, through-hole mounting), contact specifications (gold-plated, phosphor bronze), and operating temperature range (-55°C ~ 125°C). No circuit redesign or PCB layout modification is required.

Q: Are there differences in moisture sensitivity between these parts?

A: The SSQ-110-24-F-S lists MSL as Not Applicable, while SSQ-110-04-F-S specifies MSL 1 (Unlimited). This difference does not affect connector functionality or substitutability. MSL classification applies to storage and handling conditions prior to assembly, not operational performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both connectors are ROHS3 compliant, carry UL94 V-0 material flammability ratings, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What determines substitutability for SSQ series connectors?

A: Substitutability is strictly determined by matching connector type (receptacle), position count (10), mating pitch (0.100"), mounting method (through-hole), termination type (solder), contact finish (gold), voltage rating (465VAC, 655VDC), and operating temperature range (-55°C ~ 125°C).

Q: Can these connectors be used interchangeably in high-voltage applications?

A: Yes. Both parts are rated for 465VAC and 655VDC operation and maintain identical insulation material (LCP) and flammability specifications required for high-voltage environments.