SSQ-110-02-G-P-RA Equivalent & Substitute Parts

Part Overview

The SSQ-110-02-G-P-RA is a 10-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole, right-angle mounted connector features gold-plated forked contacts and is rated for -55°C to 125°C operation. The part is active in production with 859 units currently in stock. Substitute parts are identified when electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part may be unavailable or require alternative sourcing.

Substiute Parts

SSQ-110-02-G-P-RA

Samtec Inc.In Stock: 937SSQ-110-02-G-P-RA Datasheet

Current PartRFQ

SSQ-110-02-G-S-RA

Samtec Inc.In Stock: 826SSQ-110-02-G-S-RA Datasheet

SimilarRFQ

SSQ-110-02-G-S-RA

Samtec Inc.In Stock: 826SSQ-110-02-G-S-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSQ-110-02-G-P-RA are identified based on strict electrical and mechanical parameter alignment. The critical parameters determining substitution eligibility are:

• Connector type: Receptacle
• Number of positions: 10
• Pitch spacing: 0.100" (2.54mm)
• Mounting configuration: Through hole, right angle
• Contact finish: Gold plating
• Insulation material: Liquid Crystal Polymer (LCP)
• Operating temperature range: -55°C ~ 125°C
• Voltage rating: 465VAC, 655VDC
• Flammability rating: UL94 V-0
• RoHS compliance: ROHS3 Compliant

The SSQ-110-02-G-S-RA meets all these parameters and is therefore classified as a direct substitute. Both parts share the same base product number (SSQ-110), connector architecture, and electrical specifications, ensuring functional equivalence in applications requiring a 10-position 0.100" pitch receptacle connector with gold-plated contacts.

Parameter Comparison

Engineering Selection Recommendations

Both the SSQ-110-02-G-P-RA and SSQ-110-02-G-S-RA are active production parts manufactured by Samtec Inc. and maintain full ROHS3 compliance. The parts are electrically and mechanically equivalent across all specified parameters, including connector architecture, contact configuration, operating temperature range, and voltage ratings. Selection between these parts may be based on inventory availability, lead time, or moisture sensitivity requirements specific to the application environment. Both parts are suitable for direct substitution in board-to-board and cable connector applications requiring 10-position 0.100" pitch receptacle connectors with gold-plated forked contacts.

Frequently Asked Questions (FAQ)

Q: Can SSQ-110-02-G-S-RA be used as a direct replacement for SSQ-110-02-G-P-RA?

A: Yes. Both parts share identical electrical and mechanical specifications, including connector type, position count, pitch spacing, mounting configuration, contact finish, insulation material, operating temperature range, and voltage ratings. They are functionally equivalent for applications requiring a 10-position 0.100" pitch receptacle connector.

Q: What is the difference between SSQ-110-02-G-P-RA and SSQ-110-02-G-S-RA?

A: The parts are electrically and mechanically identical across all specified parameters. The difference in part number designation reflects manufacturing or packaging variations that do not affect electrical or mechanical performance in the application.

Q: Are both parts RoHS compliant?

A: Yes. Both SSQ-110-02-G-P-RA and SSQ-110-02-G-S-RA are ROHS3 compliant, meeting current environmental and hazardous substance restrictions.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial temperature environments.

Q: What voltage ratings apply to these connectors?

A: Both parts are rated for 465VAC and 655VDC, supporting standard industrial power distribution and signal applications.

Q: Are these connectors suitable for through-hole PCB mounting?

A: Yes. Both parts feature through-hole, right-angle mounting configuration with solder termination, designed for direct PCB assembly.