SSQ-107-22-S-D-RA Equivalent & Substitute Parts

Part Overview

The SSQ-107-22-S-D-RA is a 14-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole, right-angle mounted connector features gold-plated mating contacts and tin-plated posts, operating across -55°C to 125°C with UL94 V-0 flammability rating and ROHS3 compliance. The part is currently active in production with 1050 units in stock. Equivalent and substitute parts are identified based on matching electrical and mechanical specifications within the SSQ series to support design flexibility and supply chain continuity.

Substiute Parts

SSQ-107-22-S-D-RA

Samtec Inc.In Stock: 1103SSQ-107-22-S-D-RA Datasheet

Current PartRFQ

SSQ-107-02-S-D-RA

Samtec Inc.In Stock: 998SSQ-107-02-S-D-RA Datasheet

SimilarRFQ

SSQ-107-02-S-D-RA

Samtec Inc.In Stock: 998SSQ-107-02-S-D-RA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSQ-107-22-S-D-RA are identified within the Samtec SSQ series based on matching the following critical parameters:

• Connector Type & Position Count: Receptacle configuration with 14 positions
• Pitch & Row Spacing: 0.100" (2.54mm) mating pitch and row spacing
• Mounting Configuration: Through-hole, right-angle orientation
• Contact System: Forked contact type with gold mating finish and tin post finish
• Electrical Ratings: 465VAC / 655VDC voltage rating
• Environmental Compliance: UL94 V-0 flammability, ROHS3 compliance, operating range -55°C to 125°C
• Insulation Material: Liquid Crystal Polymer (LCP)

The SSQ-107-02-S-D-RA maintains identical electrical and mechanical specifications across all critical parameters, confirming direct substitution capability within the SSQ-107 base product family.

Parameter Comparison

Engineering Selection Recommendations

Both the SSQ-107-22-S-D-RA and SSQ-107-02-S-D-RA are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts is based on supply availability and inventory status. The SSQ-107-22-S-D-RA currently maintains 1050 units in stock, while the SSQ-107-02-S-D-RA maintains 925 units. Both parts carry ROHS3 compliance and UL94 V-0 flammability certification, meeting equivalent regulatory and environmental requirements. The SSQ-107-02-S-D-RA carries MSL 1 (Unlimited) moisture sensitivity rating and REACH Unaffected status, providing additional compliance documentation where required by procurement specifications.

Frequently Asked Questions (FAQ)

Q: Can SSQ-107-02-S-D-RA be used as a direct replacement for SSQ-107-22-S-D-RA?

A: Yes. Both parts share identical connector type, position count, pitch spacing, mounting configuration, contact finish specifications, voltage ratings, and operating temperature range. Electrical and mechanical compatibility is confirmed across all critical parameters.

Q: What are the key differences between these two part numbers?

A: The parts are electrically and mechanically identical. The difference in part numbering reflects internal Samtec product line designation. The SSQ-107-02-S-D-RA carries explicit MSL 1 (Unlimited) and REACH Unaffected documentation, which may be relevant for specific procurement or compliance requirements.

Q: Are both parts suitable for the same PCB footprint?

A: Yes. Both parts feature identical through-hole, right-angle mounting with 0.100" (2.54mm) pitch and row spacing, confirming PCB footprint compatibility.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, with UL94 V-0 flammability rating and Liquid Crystal Polymer insulation material.

Q: Are these parts RoHS compliant?

A: Yes. Both SSQ-107-22-S-D-RA and SSQ-107-02-S-D-RA are ROHS3 compliant.

Q: What voltage ratings apply to these connectors?

A: Both parts are rated for 465VAC and 655VDC operation.