SSQ-105-01-G-P Equivalent & Substitute Parts

Part Overview

The SSQ-105-01-G-P is a 5-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector features gold-plated forked contacts, push-pull fastening, and operates across -55°C to 125°C. The part is currently active in production with 892 units in stock. Substitute parts are identified when identical electrical and mechanical specifications are maintained across all critical parameters, ensuring direct interchangeability in existing designs without circuit modification.

Substiute Parts

SSQ-105-01-G-P

Samtec Inc.In Stock: 980SSQ-105-01-G-P Datasheet

Current PartRFQ

SSQ-105-01-G-S

Samtec Inc.In Stock: 3092SSQ-105-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-105-01-G-P is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (5)
• Mating pitch (0.100" / 2.54mm)
• Contact type (Forked)
• Mounting method (Through Hole)
• Fastening mechanism (Push-Pull)
• Contact finish specification (Gold)
• Voltage rating (465VAC, 655VDC)
• Operating temperature range (-55°C ~ 125°C)
• Flammability compliance (UL94 V-0)
• RoHS compliance status (ROHS3 Compliant)

The SSQ-105-01-G-S meets all these criteria and is classified as a direct substitute for the SSQ-105-01-G-P.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-105-01-G-P and SSQ-105-01-G-S are active production parts manufactured by Samtec Inc. with identical electrical and mechanical specifications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts may be based on inventory availability: SSQ-105-01-G-P has 892 units in stock, while SSQ-105-01-G-S has 3,040 units available. From an engineering standpoint, either part satisfies the same design requirements without modification to PCB layout, mating connector specifications, or circuit operation.

Frequently Asked Questions (FAQ)

Q: Can SSQ-105-01-G-S replace SSQ-105-01-G-P in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. No design changes are required for substitution.

Q: Are there differences in contact plating between these parts?

A: No. Both parts feature identical gold plating specifications: 20.0µin (0.51µm) on mating contacts and 3.00µin (0.076µm) on post contacts.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSQ-105-01-G-P and SSQ-105-01-G-S are ROHS3 compliant, UL94 V-0 rated, and classified as EAR99 for export purposes.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial applications.

Q: Are these parts suitable for high-voltage applications?

A: Yes. Both parts are rated for 465VAC and 655VDC, appropriate for standard industrial voltage levels.

Q: What mounting method do these connectors use?

A: Both parts use through-hole solder termination for permanent PCB mounting.