SSQ-104-02-T-P Equivalent & Substitute Parts

Part Overview

The SSQ-104-02-T-P is a 4-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch through-hole mounting. This connector is classified as an active product with full inventory availability (744 pcs in stock). Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector series, enabling component interchangeability for procurement flexibility and supply chain continuity.

Substiute Parts

SSQ-104-02-T-P

Samtec Inc.In Stock: 827SSQ-104-02-T-P Datasheet

Current PartRFQ

SSQ-104-02-T-S

Samtec Inc.In Stock: 1090SSQ-104-02-T-S Datasheet

SimilarRFQ

SSQ-104-02-T-S

Samtec Inc.In Stock: 1090SSQ-104-02-T-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-104-02-T-P is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (4)
• Pitch specification (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Termination type (Solder)
• Fastening mechanism (Push-Pull)
• Operating temperature range (-55°C ~ 105°C)
• Voltage rating (465VAC, 655VDC)
• Material flammability compliance (UL94 V-0)
• Series designation (SSQ)
• Base product number (SSQ-104)

The identified substitute part SSQ-104-02-T-S maintains all critical electrical and mechanical parameters, differing only in packaging configuration and moisture sensitivity level specifications, which do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-104-02-T-P and SSQ-104-02-T-S are active products with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on packaging requirements and inventory availability. The SSQ-104-02-T-P is available in bulk packaging with 744 pcs in stock, while the SSQ-104-02-T-S is also available in bulk with 1026 pcs in stock. Both parts meet identical electrical specifications, mechanical dimensions, and regulatory requirements for rectangular connector applications requiring 4-position, 0.100" pitch through-hole receptacle configurations.

Frequently Asked Questions (FAQ)

Q: Can SSQ-104-02-T-S be used as a direct replacement for SSQ-104-02-T-P?

A: Yes. Both parts maintain identical electrical and mechanical specifications including connector type, position count, pitch, mounting method, termination type, operating temperature range, and voltage rating. The parts are functionally interchangeable in applications where the specified parameters are required.

Q: What are the key differences between SSQ-104-02-T-P and SSQ-104-02-T-S?

A: The parts differ in packaging configuration and moisture sensitivity level designation. These differences do not affect functional performance or electrical characteristics in standard board-to-board or cable connector applications.

Q: Are both parts RoHS compliant?

A: Yes. Both SSQ-104-02-T-P and SSQ-104-02-T-S are ROHS3 compliant and meet UL94 V-0 flammability requirements.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 105°C, suitable for industrial and commercial temperature environments.

Q: What voltage ratings apply to these receptacle connectors?

A: Both parts are rated for 465VAC and 655VDC applications.

Q: Are these connectors suitable for through-hole PCB assembly?

A: Yes. Both parts are designed for through-hole solder termination with push-pull fastening mechanisms.