SSQ-104-01-G-P Equivalent & Substitute Parts

Part Overview

The SSQ-104-01-G-P is a 4-position receptacle connector manufactured by Samtec Inc., designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. This through-hole connector features gold-plated forked contacts, push-pull fastening, and is rated for operating temperatures from -55°C to 125°C. The part is currently active in production with ROHS3 compliance and UL94 V-0 flammability rating. Identifying equivalent substitute parts is necessary to ensure supply chain flexibility, optimize inventory management, and maintain design compatibility across manufacturing batches.

Substiute Parts

SSQ-104-01-G-P

Samtec Inc.In Stock: 1154SSQ-104-01-G-P Datasheet

Current PartRFQ

SSQ-104-01-G-S

Samtec Inc.In Stock: 2262SSQ-104-01-G-S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSQ-104-01-G-P is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle)
• Number of positions (4)
• Pitch spacing (0.100" / 2.54mm)
• Mounting method (Through Hole)
• Contact configuration (Forked contacts)
• Termination method (Solder)
• Fastening mechanism (Push-Pull)
• Contact finish specification (Gold plating)
• Operating temperature range (-55°C ~ 125°C)
• Voltage rating (465VAC, 655VDC minimum)
• Regulatory compliance (UL94 V-0, ROHS3)

The SSQ-104-01-G-S qualifies as a direct substitute based on identical alignment across all these parameters. Both parts belong to the same SSQ series base product (SSQ-104) and share identical electrical, mechanical, and environmental specifications.

Parameter Comparison

Engineering Selection Recommendations

Both SSQ-104-01-G-P and SSQ-104-01-G-S are active production parts with identical compliance certifications (ROHS3 Compliant, UL94 V-0). Selection between these parts may be based on inventory availability and supply chain considerations. The SSQ-104-01-G-S currently maintains higher inventory levels (2206 pcs vs. 1138 pcs), which may provide supply chain advantages. Both parts meet all specified electrical, mechanical, and environmental requirements for direct substitution in board-to-board and cable connector applications.

Frequently Asked Questions (FAQ)

Q: Can SSQ-104-01-G-S be used as a direct replacement for SSQ-104-01-G-P?

A: Yes. Both parts are identical across all critical substitution parameters including connector type, position count, pitch spacing, contact configuration, termination method, fastening type, contact finish, operating temperature range, voltage rating, and regulatory compliance.

Q: Are there any mechanical compatibility concerns when substituting between these parts?

A: No. The parts share identical mechanical specifications including insulation height (0.335"), contact length (0.104"), contact shape (square), and mounting type (through hole). PCB footprints and mating interfaces are identical.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both SSQ-104-01-G-P and SSQ-104-01-G-S are ROHS3 compliant and carry UL94 V-0 flammability rating. Both are rated for 465VAC and 655VDC operation.

Q: What is the difference between these two part numbers?

A: The parts are functionally and electrically equivalent. The suffix difference (P vs. S) reflects internal Samtec manufacturing or packaging designations but does not affect electrical performance, mechanical fit, or environmental ratings.

Q: Are there any temperature or voltage derating considerations?

A: No. Both parts operate identically across the -55°C to 125°C temperature range and are rated for 465VAC and 655VDC. No derating is required between these substitutes.