SSM-110-S-SV-BE-P-TR Equivalent & Substitute Parts

Part Overview

The SSM-110-S-SV-BE-P-TR is a 10-position receptacle connector from Samtec Inc.'s Tiger Claw™ SSM series, designed for surface mount board-to-board or cable applications. This bottom entry connector features 0.100" (2.54mm) pitch spacing, gold-plated mating contacts, and solder termination with push-pull fastening. The part is currently active in production with full inventory availability. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility within the same connector family.

Substiute Parts

SSM-110-S-SV-BE-P-TR

Samtec Inc.In Stock: 1115SSM-110-S-SV-BE-P-TR Datasheet

Current PartRFQ

SSM-110-S-SV-BE-K-TR

Samtec Inc.In Stock: 1019SSM-110-S-SV-BE-K-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSM-110-S-SV-BE-P-TR is determined by strict equivalence across the following critical parameters:

• Manufacturer and series consistency (Samtec Inc., Tiger Claw™ SSM)
• Identical connector configuration (10-position receptacle, bottom entry, 0.100" pitch)
• Matching contact specifications (female socket, gold mating finish, phosphor bronze material)
• Equivalent electrical ratings (5.2A per contact, 405VAC/572VDC)
• Identical mounting and termination methods (surface mount, solder)
• Matching environmental specifications (operating temperature, MSL rating)
• Compliance alignment (ROHS3, EAR99 classification)

The identified substitute part SSM-110-S-SV-BE-K-TR meets all these criteria, differing only in post termination configuration, which does not affect mating interface compatibility or electrical performance.

Parameter Comparison

Engineering Selection Recommendations

Both SSM-110-S-SV-BE-P-TR and SSM-110-S-SV-BE-K-TR are active production parts from Samtec Inc. with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and lead time requirements. The SSM-110-S-SV-BE-P-TR currently maintains 1091 units in stock, while the SSM-110-S-SV-BE-K-TR has 952 units available. Both parts meet all regulatory requirements (EAR99 classification, MSL Level 1) and are suitable for immediate deployment in applications requiring 10-position, 0.100" pitch surface mount receptacle connectors with 5.2A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can SSM-110-S-SV-BE-K-TR be used as a direct replacement for SSM-110-S-SV-BE-P-TR?

A: Yes. Both parts are electrically and mechanically equivalent across all mating interface parameters. They share identical connector geometry, contact specifications, electrical ratings, and environmental performance characteristics.

Q: What is the difference between these two part numbers?

A: The parts differ only in post termination configuration, which does not affect the mating interface or electrical performance of the connector. Both use solder termination and are compatible with identical PCB layouts.

Q: Are there any compatibility concerns when substituting between these parts?

A: No. The mating interface, pitch spacing, contact arrangement, and electrical specifications are identical. PCB footprints and assembly processes remain unchanged.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSM-110-S-SV-BE-P-TR and SSM-110-S-SV-BE-K-TR are ROHS3 compliant with MSL Level 1 rating and EAR99 classification.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 125°C, suitable for industrial and commercial applications.

Q: What is the current and voltage rating for each contact?

A: Each contact is rated for 5.2A maximum current with voltage ratings of 405VAC or 572VDC.

Q: Are these parts available in tape and reel packaging?

A: Yes. Both SSM-110-S-SV-BE-P-TR and SSM-110-S-SV-BE-K-TR are supplied in tape and reel (TR) packaging for automated assembly processes.