SSM-105-S-DV-TR Equivalent & Substitute Parts

Part Overview

The SSM-105-S-DV-TR is a 10-position rectangular receptacle connector from Samtec Inc.'s Tiger Claw™ SSM series, designed for surface mount applications with 0.100" (2.54mm) pitch spacing. This pass-through connector features gold-plated mating contacts and is rated for 5.2A per contact at 405VAC/572VDC. The part is active and ROHS3 compliant with MSL 1 rating. Substitute parts are identified to address packaging format variations, feature enhancements, and inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

SSM-105-S-DV-TR

Samtec Inc.In Stock: 812SSM-105-S-DV-TR Datasheet

Current PartRFQ

SSM-105-S-DV-A-K-TR

Samtec Inc.In Stock: 1332SSM-105-S-DV-A-K-TR Datasheet

SimilarRFQ

SSM-105-S-DV-A-P-TR

Samtec Inc.In Stock: 1834SSM-105-S-DV-A-P-TR Datasheet

SimilarRFQ

SSM-105-S-DV-K-TR

Samtec Inc.In Stock: 2014SSM-105-S-DV-K-TR Datasheet

SimilarRFQ

SSM-105-S-DV-LC-P-TR

Samtec Inc.In Stock: 1203SSM-105-S-DV-LC-P-TR Datasheet

SimilarRFQ

SSM-105-S-DV-P-TR

Samtec Inc.In Stock: 1521SSM-105-S-DV-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of SSM-105-S-DV-TR is determined by strict equivalence in the following core parameters: connector type (receptacle, pass-through), contact configuration (10 positions, 2 rows, 0.100" pitch), mounting method (surface mount), contact material and finish (gold-plated phosphor bronze), electrical ratings (5.2A per contact, 405VAC/572VDC), operating temperature range (-55°C to 125°C), and insulation material (LCP). All substitute parts maintain these specifications without deviation.

Variations among substitute parts are limited to:

• Packaging format (Tape & Reel versus Cut Tape)
• Fastening features (Push-Pull with or without board guide/lock)
• Pick and place compatibility enhancements

These variations do not affect electrical performance, mating compatibility, or thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain identical electrical specifications and are ROHS3 compliant with MSL 1 rating. Selection between SSM-105-S-DV-TR and its substitutes depends on manufacturing process requirements:

SSM-105-S-DV-A-K-TR and SSM-105-S-DV-A-P-TR include board guide features for improved alignment during assembly. SSM-105-S-DV-K-TR and SSM-105-S-DV-P-TR provide pick-and-place compatibility without board guide. SSM-105-S-DV-LC-P-TR offers board lock functionality with cut tape packaging for lower-volume applications.

Packaging format selection: Tape & Reel (TR) suits high-volume automated assembly; Cut Tape (CT) accommodates lower-volume or mixed-component requirements. All parts are sourced from Samtec Inc. with active product status and REACH unaffected designation where specified.

Frequently Asked Questions (FAQ)

Q: Can SSM-105-S-DV-TR be directly replaced with SSM-105-S-DV-K-TR? A: Yes. Both parts share identical electrical ratings (5.2A per contact, 405VAC/572VDC), contact configuration (10 positions, 0.100" pitch), and operating temperature range (-55°C to 125°C). The difference is packaging format and pick-and-place features, which do not affect mating compatibility or electrical performance.

Q: What is the difference between board guide and board lock features? A: Board guide (present in SSM-105-S-DV-A-K-TR and SSM-105-S-DV-A-P-TR) provides alignment assistance during connector mating. Board lock (present in SSM-105-S-DV-LC-P-TR) provides mechanical retention after mating. Both are optional enhancements; the base connector functions identically without them.

Q: Why would I choose Cut Tape packaging over Tape & Reel? A: Cut Tape (CT) packaging is suitable for lower-volume production runs or when mixed component kits are required. Tape & Reel (TR) is optimized for high-volume automated pick-and-place assembly lines.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Do substitute parts have different mating contact finishes? A: No. All parts feature gold-plated mating contacts with 30.0µin (0.76µm) thickness. Contact material is phosphor bronze across all variants.