SSM-102-S-DV-TR Equivalent & Substitute Parts

Part Overview

The SSM-102-S-DV-TR is a 4-position rectangular receptacle connector from Samtec Inc.'s Tiger Claw™ SSM series. This surface mount, pass-through connector features 0.100" (2.54mm) pitch mating with gold-plated female socket contacts rated for 5.2A per contact and 405VAC/572VDC operation. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity while maintaining electrical and mechanical compatibility.

Substiute Parts

SSM-102-S-DV-TR

Samtec Inc.In Stock: 1492SSM-102-S-DV-TR Datasheet

Current PartRFQ

SSM-102-S-DV-K-TR

Samtec Inc.In Stock: 1208SSM-102-S-DV-K-TR Datasheet

SimilarRFQ

SSM-102-S-DV-P-TR

Samtec Inc.In Stock: 1938SSM-102-S-DV-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSM-102-S-DV-TR are identified based on strict electrical and mechanical parameter equivalence within the Tiger Claw™ SSM series. The following parameters define substitution eligibility:

• Connector type: Receptacle, Pass Through
• Number of positions: 4
• Pitch - Mating: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing - Mating: 0.100" (2.54mm)
• Mounting type: Surface Mount
• Contact type: Female Socket
• Contact finish - Mating: Gold
• Current rating: 5.2A per Contact
• Voltage rating: 405VAC, 572VDC
• Operating temperature: -55°C ~ 125°C
• Packaging: Tape & Reel (TR)
• RoHS status: ROHS3 Compliant

The identified substitutes SSM-102-S-DV-K-TR and SSM-102-S-DV-P-TR meet all critical electrical and mechanical parameters. Differences are limited to fastening mechanism variations and pick-and-place feature availability, which do not affect core connector functionality or mating compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSM-102-S-DV-TR, SSM-102-S-DV-K-TR, and SSM-102-S-DV-P-TR—are Active status products from Samtec Inc. and maintain full ROHS3 compliance and REACH unaffected status. Selection between these parts is based on application-specific requirements:

SSM-102-S-DV-TR is the baseline configuration without pick-and-place optimization features.

SSM-102-S-DV-K-TR and SSM-102-S-DV-P-TR include pick-and-place features, making them suitable for automated assembly environments where component handling efficiency is a design consideration.

All three parts share identical electrical ratings, mechanical dimensions, contact materials, and environmental operating ranges. Substitution between any of these parts does not compromise circuit performance, signal integrity, or reliability when mating interface requirements remain constant.

Frequently Asked Questions (FAQ)

Q: Can SSM-102-S-DV-K-TR or SSM-102-S-DV-P-TR be used as direct replacements for SSM-102-S-DV-TR?

A: Yes. All three parts are electrically and mechanically equivalent. They share identical connector type, position count, pitch, row spacing, contact ratings, voltage ratings, and operating temperature ranges. The differences are limited to pick-and-place feature availability, which does not affect mating compatibility or electrical performance.

Q: What is the difference between SSM-102-S-DV-TR, SSM-102-S-DV-K-TR, and SSM-102-S-DV-P-TR?

A: The primary difference is the presence of pick-and-place features in the K-TR and P-TR variants. These features optimize component handling during automated assembly but do not alter the connector's electrical or mechanical interface specifications.

Q: Are all three parts available in the same packaging format?

A: Yes. All three parts are supplied in Tape & Reel (TR) packaging, enabling compatibility with standard component handling and placement equipment.

Q: Do these parts maintain the same compliance certifications?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity levels (MSL 1 - Unlimited), ensuring equivalent regulatory and environmental compliance.

Q: Can these connectors be used interchangeably in existing designs?

A: Yes, provided the mating interface (plug or cable connector) is compatible with the 0.100" (2.54mm) pitch, 4-position, 2-row receptacle configuration. All three parts maintain identical contact geometry, spacing, and electrical characteristics.