SSM-102-L-DV-M-TR Equivalent & Substitute Parts

Part Overview

The SSM-102-L-DV-M-TR is a 4-position rectangular receptacle connector from Samtec Inc.'s Tiger Claw™ SSM series. This surface mount, pass-through connector features gold-plated mating contacts and is designed for board-to-board or cable applications with 0.100" (2.54mm) pitch spacing. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when electrical specifications, mechanical dimensions, and packaging formats remain identical across the product line, enabling direct replacement in existing designs.

Substiute Parts

SSM-102-L-DV-M-TR

Samtec Inc.In Stock: 764SSM-102-L-DV-M-TR Datasheet

Current PartRFQ

SSM-102-L-DV-K-TR

Samtec Inc.In Stock: 2269SSM-102-L-DV-K-TR Datasheet

SimilarRFQ

SSM-102-L-DV-P-TR

Samtec Inc.In Stock: 1059SSM-102-L-DV-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSM-102-L-DV-M-TR are identified based on strict equivalence across the following critical parameters:

• Connector type, contact configuration, and position count (4-position receptacle)
• Mating pitch and row spacing (0.100" / 2.54mm)
• Electrical ratings (5.2A per contact, 405VAC / 572VDC)
• Operating temperature range (-55°C ~ 125°C)
• Surface mount termination and gold mating contact finish
• Packaging format (Tape & Reel)
• Base product number (SSM-102)
• Compliance certifications (ROHS3)

The identified substitutes SSM-102-L-DV-K-TR and SSM-102-L-DV-P-TR maintain identical electrical and mechanical specifications. Differences exist only in fastening mechanism designation (indicated by the K and P suffix variants), which do not affect electrical or dimensional compatibility within the Tiger Claw™ SSM series architecture.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SSM-102-L-DV-M-TR, SSM-102-L-DV-K-TR, and SSM-102-L-DV-P-TR—maintain Active product status within the Tiger Claw™ SSM series. Each part is ROHS3 compliant and carries identical electrical ratings, mechanical dimensions, and environmental specifications. Selection among these equivalents is determined by design requirements specific to fastening mechanism variants, not by electrical or thermal performance differences. All parts are suitable for direct substitution in applications requiring 4-position, 0.100" pitch surface mount receptacle connectors with gold mating contacts and 5.2A per contact current capacity.

Frequently Asked Questions (FAQ)

Q: Can SSM-102-L-DV-K-TR and SSM-102-L-DV-P-TR be used interchangeably with SSM-102-L-DV-M-TR?

A: Yes. All three parts share identical electrical specifications (5.2A per contact, 405VAC / 572VDC), mechanical dimensions (4-position, 0.100" pitch, 2-row configuration), contact materials (phosphor bronze with 10.0µin gold plating), and operating temperature range (-55°C ~ 125°C). Differences in part number suffixes reflect fastening mechanism variants that do not affect electrical or dimensional compatibility.

Q: Are there any compliance or certification differences between these substitute parts?

A: No. All three parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the significance of the different suffixes (M, K, P) in the part numbers?

A: The suffixes indicate fastening mechanism variants within the Tiger Claw™ SSM series. These designations do not alter electrical performance, current capacity, voltage rating, or mating contact specifications.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. SSM-102-L-DV-M-TR, SSM-102-L-DV-K-TR, and SSM-102-L-DV-P-TR are all supplied in Tape & Reel (TR) packaging format suitable for automated assembly processes.

Q: Can these connectors be used in applications requiring both AC and DC voltage?

A: Yes. All three parts are rated for 405VAC and 572VDC, supporting applications requiring either AC or DC operation within these voltage limits.