SSL-LX5093IT-11 Equivalent & Substitute Parts

Part Overview

The SSL-LX5093IT-11 is an active red LED indication component manufactured by Lumex Opto/Components Inc. This through-hole mounted T-1 3/4 LED features a 5mm clear lens with domed top, rated at 80 millicandela with a 2V forward voltage and 20mA test current. The component is ROHS3 compliant and REACH unaffected, suitable for discrete red indication applications requiring standard brightness output.

Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this product category, enabling direct component selection for applications where the primary part is unavailable or inventory constraints exist.

Substiute Parts

SSL-LX5093IT-11

Lumex Opto/Components Inc.In Stock: 1064SSL-LX5093IT-11 Datasheet

Current PartRFQ

SSL-LX5093IT

Lumex Opto/Components Inc.In Stock: 6741SSL-LX5093IT Datasheet

Parametric EquivalentRFQ

HLMP-D155

Broadcom LimitedIn Stock: 9365HLMP-D155 Datasheet

SimilarRFQ

SLR-56VC3F

Rohm SemiconductorIn Stock: 3145SLR-56VC3F Datasheet

SimilarRFQ

WP7113IT

KingbrightIn Stock: 29158WP7113IT Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSL-LX5093IT-11 are classified based on alignment with the following critical parameters: color (red), lens size (5mm T-1 3/4), lens style (round with domed top), lens transparency (clear), mounting type (through hole), and package configuration (radial).

The SSL-LX5093IT represents a parametric equivalent with identical electrical and mechanical specifications, differentiated only by packaging format (bulk versus tape). The WP7113IT, SLR-56VC3F, and HLMP-D155 are classified as similar alternatives that maintain the same physical form factor and mounting configuration while presenting variations in forward voltage, test current, millicandela rating, and wavelength characteristics.

Substitution eligibility is determined by: (1) matching lens size and form factor, (2) compatible mounting type, (3) red color specification, (4) through-hole radial package configuration, and (5) compliance certifications (ROHS3, REACH unaffected).

Parameter Comparison

Engineering Selection Recommendations

SSL-LX5093IT (Parametric Equivalent)

The SSL-LX5093IT is a direct parametric equivalent to the SSL-LX5093IT-11, maintaining identical electrical specifications (2V forward voltage, 20mA test current, 80mcd brightness) and mechanical configuration (5mm T-1 3/4 form factor, 8.60mm maximum height). The distinction between these parts is packaging format: SSL-LX5093IT-11 is supplied in tape format, while SSL-LX5093IT is supplied in bulk. Both components are manufactured by Lumex Opto/Components Inc., carry active product status, and maintain full ROHS3 compliance and REACH unaffected status. Selection between these variants depends on assembly process requirements and packaging compatibility.

WP7113IT (Similar Alternative)

The WP7113IT manufactured by Kingbright maintains the same 2V forward voltage and 20mA test current as the primary part, with identical 5mm T-1 3/4 form factor and 8.60mm maximum height. This component offers increased brightness output at 100mcd compared to the 80mcd rating of the SSL-LX5093IT-11, with a narrower viewing angle of 20° versus 30°. The WP7113IT is ROHS3 compliant and REACH unaffected. Selection of this alternative is appropriate for applications requiring higher brightness output within the same electrical operating parameters.

SLR-56VC3F (Similar Alternative)

The SLR-56VC3F manufactured by Rohm Semiconductor maintains the 2V forward voltage specification but operates at reduced test current of 10mA compared to the 20mA of the primary part. This component provides 25mcd brightness output with a wider 40° viewing angle. The physical form factor remains compatible at 5mm T-1 3/4 with 8.90mm maximum height. The SLR-56VC3F is ROHS3 compliant and REACH unaffected. Selection of this alternative is appropriate for applications where reduced current consumption is beneficial and lower brightness output is acceptable.

HLMP-D155 (Similar Alternative)

The HLMP-D155 manufactured by Broadcom Limited presents the most significant parameter variations among substitute options. This component operates at 1.7V forward voltage with 1mA test current, substantially lower than the primary part's 2V and 20mA specifications. Brightness output is rated at 10mcd with a 24° viewing angle. The physical form factor is 5mm T-1 3/4, but maximum height reaches 12.44mm, exceeding the primary part's 8.60mm specification. The HLMP-D155 is ROHS3 compliant and REACH unaffected. Selection of this alternative is appropriate only for applications where reduced voltage and current requirements are critical design parameters and the increased height does not create mechanical constraints.

Frequently Asked Questions (FAQ)

Q: Can SSL-LX5093IT-11 and SSL-LX5093IT be used interchangeably?

A: Yes. These components are parametric equivalents with identical electrical and mechanical specifications. The difference is packaging format: SSL-LX5093IT-11 is tape packaged while SSL-LX5093IT is bulk packaged. Selection depends on assembly process compatibility and packaging requirements.

Q: What are the key differences between SSL-LX5093IT-11 and WP7113IT?

A: Both components operate at 2V forward voltage with 20mA test current and share the same 5mm T-1 3/4 form factor. The WP7113IT provides higher brightness output at 100mcd versus 80mcd, with a narrower viewing angle of 20° compared to 30°. Selection depends on brightness and viewing angle requirements for the specific application.

Q: Is the HLMP-D155 suitable as a direct replacement for SSL-LX5093IT-11?

A: The HLMP-D155 shares the same 5mm T-1 3/4 lens size and through-hole radial package configuration. However, it operates at significantly different electrical parameters: 1.7V forward voltage and 1mA test current versus 2V and 20mA. Additionally, its maximum height of 12.44mm exceeds the primary part's 8.60mm specification. Substitution is appropriate only when reduced voltage and current operation are design requirements and increased height does not create mechanical constraints.

Q: What mounting compatibility exists across all substitute parts?

A: All substitute parts listed maintain through-hole radial package configuration with 5mm T-1 3/4 lens size. Physical mounting compatibility is confirmed for all alternatives. Height variations exist: SSL-LX5093IT-11, SSL-LX5093IT, and WP7113IT are 8.60mm; SLR-56VC3F is 8.90mm; HLMP-D155 is 12.44mm. PCB layout and mechanical clearance must accommodate these height differences.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed—SSL-LX5093IT, WP7113IT, SLR-56VC3F, and HLMP-D155—carry ROHS3 compliance certification and REACH unaffected status, matching the primary part's regulatory compliance profile.

Q: Which substitute part most closely matches the SSL-LX5093IT-11 specifications?

A: The SSL-LX5093IT is the closest match, providing identical electrical specifications (2V forward voltage, 20mA test current, 80mcd brightness) and mechanical configuration. The only difference is packaging format. For applications requiring the same electrical and optical performance, SSL-LX5093IT is the primary substitute option.

Q: Can SLR-56VC3F replace SSL-LX5093IT-11 in high-current applications?

A: No. The SLR-56VC3F operates at 10mA test current, half the 20mA specification of the SSL-LX5093IT-11. This component is suitable only for applications where reduced current consumption is acceptable and lower brightness output (25mcd versus 80mcd) meets design requirements.