SSL-LX507F3ID Equivalent & Substitute Parts

Part Overview

The SSL-LX507F3ID is an active red LED indication component manufactured by Lumex Opto/Components Inc. This through-hole mounted T-1 3/4 diffused lens LED operates at 2V forward voltage with a 40mcd brightness rating and 635nm peak wavelength. The component is designed for discrete red LED indication applications in radial configuration. Substitute parts are identified based on matching electrical specifications, mechanical form factor, and compliance certifications to ensure direct functional equivalence in circuit applications.

Substiute Parts

SSL-LX507F3ID

Lumex Opto/Components Inc.In Stock: 793SSL-LX507F3ID Datasheet

Current PartRFQ

SSL-LX5063ID

Lumex Opto/Components Inc.In Stock: 16627SSL-LX5063ID Datasheet

DirectRFQ

SSL-LX5093LID

Lumex Opto/Components Inc.In Stock: 33440SSL-LX5093LID Datasheet

DirectRFQ

WP1503ID

KingbrightIn Stock: 2603WP1503ID Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSL-LX507F3ID are qualified based on the following critical parameters that determine functional equivalence:

Electrical Compatibility:

• Forward voltage (Vf) of 2V
• Test current of 20mA
• Millicandela rating of 40mcd
• Viewing angle of 60°

Mechanical Compatibility:

• Red color with diffused lens transparency
• 5mm T-1 3/4 lens size
• Through-hole radial mounting configuration

Compliance & Regulatory:

• ROHS3 Compliant status
• REACH Unaffected classification
• Moisture Sensitivity Level 1 (Unlimited)

All substitute parts listed maintain these core parameters, ensuring direct replacement capability in existing circuit designs without modification to current-limiting resistor values or circuit topology.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full compliance with ROHS3 and REACH regulations, ensuring regulatory continuity in production environments. The SSL-LX5063ID, SSL-LX5093LID, and WP1503ID are electrically and mechanically equivalent to the SSL-LX507F3ID for circuit-level substitution purposes.

Lumex Opto/Components Inc. Substitutes (SSL-LX5063ID, SSL-LX5093LID): These parts are manufactured by the same supplier as the primary component and maintain identical electrical specifications. Differences in maximum height (6.00mm for SSL-LX5063ID and 8.60mm for SSL-LX5093LID versus 7.20mm for SSL-LX507F3ID) are mechanical variations that do not affect electrical performance. Selection between these variants depends on available board space and mechanical clearance requirements.

Kingbright Substitute (WP1503ID): This cross-manufacturer substitute maintains all critical electrical parameters and mechanical form factor. The wavelength-peak specification differs at 627nm compared to 635nm for Lumex parts, representing a minor shift within the red LED spectrum that does not affect functional indication performance at the specified 40mcd brightness level.

Frequently Asked Questions (FAQ)

Q: Can SSL-LX5063ID be used as a direct replacement for SSL-LX507F3ID?

A: Yes. Both components share identical electrical specifications (2V forward voltage, 20mA test current, 40mcd brightness, 60° viewing angle) and mechanical form factor (5mm T-1 3/4 through-hole radial package). The SSL-LX5063ID has a maximum height of 6.00mm compared to 7.20mm for the SSL-LX507F3ID. This height difference does not affect circuit functionality and is suitable for applications with tighter vertical clearance constraints.

Q: What is the difference between SSL-LX5093LID and SSL-LX507F3ID?

A: Both parts are electrically identical with 2V forward voltage, 20mA test current, and 40mcd brightness. The SSL-LX5093LID has a maximum height of 8.60mm compared to 7.20mm for the SSL-LX507F3ID. This height difference is a mechanical variation only and does not impact electrical performance or circuit compatibility.

Q: Is WP1503ID from Kingbright compatible with SSL-LX507F3ID?

A: Yes. The WP1503ID maintains all critical electrical parameters (2V forward voltage, 20mA test current, 40mcd brightness, 60° viewing angle) and mechanical specifications (5mm T-1 3/4 through-hole radial package). The wavelength-peak specification is 627nm for WP1503ID versus 635nm for SSL-LX507F3ID. Both wavelengths are within the red LED spectrum and produce equivalent visual indication at the specified brightness level.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed (SSL-LX5063ID, SSL-LX5093LID, and WP1503ID) are ROHS3 Compliant with REACH Unaffected status, matching the compliance profile of the SSL-LX507F3ID.

Q: What is the moisture sensitivity level for these LED components?

A: All parts in this substitution group have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or soldering processes.

Q: Can I use these parts interchangeably in production?

A: Yes, for circuit-level functionality. All substitute parts are electrically equivalent and maintain the same through-hole radial mounting configuration. Mechanical height variations (6.00mm to 8.60mm) require verification against specific board layout and clearance requirements. Packaging format differences (bulk versus other configurations) should be confirmed against procurement specifications.