SSL-LX30FT4ID-TD Equivalent & Substitute Parts

Part Overview

The SSL-LX30FT4ID-TD is a red LED indication component manufactured by Lumex Opto/Components Inc. This through-hole mounted T-1 LED features a diffused red lens with a 3mm form factor and is designed for discrete 2V radial applications. The component is classified as Active product status and maintains full compliance with RoHS3 and REACH regulations. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when bulk packaging requirements differ from standard tape-and-reel configurations.

Substiute Parts

SSL-LX30FT4ID-TD

Lumex Opto/Components Inc.In Stock: 963SSL-LX30FT4ID-TD Datasheet

Current PartRFQ

SSL-LX30FT4ID

Lumex Opto/Components Inc.In Stock: 6005SSL-LX30FT4ID Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSL-LX30FT4ID-TD are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Color and Optical Properties: Red lens color with diffused transparency and 15mcd brightness rating
• Electrical Characteristics: 2V forward voltage and 20mA test current
• Physical Form Factor: 3mm T-1 lens size with round domed top configuration
• Mounting Configuration: Through-hole radial package with 6.70mm maximum height
• Viewing Angle: 100° optical viewing angle
• Wavelength: 635nm peak wavelength
• Compliance Status: RoHS3 compliant and REACH unaffected

The primary difference between the main part and its substitute relates to packaging configuration (tape-and-reel versus bulk) rather than functional or electrical parameters. Both parts share the same base product number SSL-LX30 and maintain identical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both SSL-LX30FT4ID-TD and SSL-LX30FT4ID are Active status products manufactured by Lumex Opto/Components Inc. and maintain full compliance with RoHS3 and REACH regulations. The components are electrically and mechanically identical, with the distinction limited to packaging configuration.

Selection between these parts is determined by procurement and assembly requirements:

• SSL-LX30FT4ID-TD is supplied in tape-and-reel packaging, suitable for automated pick-and-place assembly processes and high-volume production environments.
• SSL-LX30FT4ID is supplied in bulk packaging, suitable for manual assembly, kit builds, or applications where tape-and-reel format is not required.

Both parts deliver identical performance in circuit applications and are interchangeable from an electrical and mechanical standpoint. Inventory availability and packaging format should guide the selection decision.

Frequently Asked Questions (FAQ)

Q: Are SSL-LX30FT4ID-TD and SSL-LX30FT4ID electrically identical?

A: Yes. Both parts share identical electrical specifications including 2V forward voltage, 20mA test current, 15mcd brightness rating, and 635nm peak wavelength. They are functionally equivalent in all circuit applications.

Q: What is the primary difference between these two part numbers?

A: The primary difference is packaging configuration. SSL-LX30FT4ID-TD is supplied in tape-and-reel format, while SSL-LX30FT4ID is supplied in bulk packaging. All other specifications remain identical.

Q: Can SSL-LX30FT4ID be used in place of SSL-LX30FT4ID-TD?

A: Yes, from an electrical and mechanical standpoint. However, bulk packaging may require manual handling and sorting, which differs from automated tape-and-reel assembly processes. Verify that your assembly process accommodates bulk component handling.

Q: Are both parts RoHS3 compliant?

A: Yes. Both SSL-LX30FT4ID-TD and SSL-LX30FT4ID are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the moisture sensitivity level for these components?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these parts be used interchangeably in through-hole PCB applications?

A: Yes. Both parts feature identical through-hole radial mounting configuration with 6.70mm maximum height, making them mechanically interchangeable in PCB designs.

Q: What is the viewing angle specification?

A: Both parts provide a 100° viewing angle, suitable for general indication applications where wide-angle visibility is required.