SSL-LX20465LGD Equivalent & Substitute Parts

Part Overview

The SSL-LX20465LGD is a green LED indication component manufactured by Lumex Opto/Components Inc. This through-hole mounted LED features a diffused lens with a 2.00mm diameter and is designed for discrete 2.2V radial applications. The component is currently in active product status with 739 pieces available in new original inventory.

Substitute parts are identified when electrical characteristics, mechanical dimensions, and packaging specifications align within the allowed parameters for this LED category. Equivalent parts enable procurement flexibility while maintaining functional compatibility in circuit applications.

Substiute Parts

SSL-LX20465LGD

Lumex Opto/Components Inc.In Stock: 780SSL-LX20465LGD Datasheet

Current PartRFQ

SSL-LX20465GD

Lumex Opto/Components Inc.In Stock: 15155SSL-LX20465GD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSL-LX20465LGD is determined by strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• Forward voltage (Vf): 2.2V typical
• Test current: 20mA
• Millicandela rating: 10mcd
• Peak wavelength: 565nm
• Viewing angle: 70°

Mechanical Compatibility Parameters:

• Lens color: Green
• Lens transparency: Diffused
• Lens size: 2.00mm diameter
• Lens style: Round with flat top
• Mounting type: Through hole
• Package type: Radial
• Supplier device package: T-2mm taper body
• Maximum height: 5.00mm

Compliance Parameters:

• RoHS3 compliance required
• Moisture sensitivity level: 1 (unlimited)
• Product status: Active

Substitute parts must match all electrical and mechanical parameters listed above. Packaging format (tape/reel versus bulk) does not affect functional substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The SSL-LX20465GD is a direct parametric equivalent to the SSL-LX20465LGD. All electrical characteristics, mechanical dimensions, and compliance certifications are identical. Both components are manufactured by Lumex Opto/Components Inc., maintain active product status, and carry ROHS3 compliance with MSL 1 rating.

The primary difference between these parts is packaging format: SSL-LX20465LGD is supplied in tape/reel format, while SSL-LX20465GD is supplied in bulk packaging. This distinction affects procurement and handling procedures but does not impact functional performance or circuit compatibility.

Selection between these equivalent parts should be based on:

1. Packaging Requirements: Choose SSL-LX20465LGD for automated assembly processes requiring tape/reel format. Choose SSL-LX20465GD for manual assembly or applications where bulk packaging is acceptable.

2. Inventory Availability: SSL-LX20465GD offers significantly higher stock levels (15088 pieces versus 739 pieces), providing greater procurement flexibility and shorter lead times.

3. Supply Chain Continuity: Both parts share the same base product number (SSL-LX20465) and maintain active status, ensuring long-term availability.

Frequently Asked Questions (FAQ)

Q: Can SSL-LX20465GD be used as a direct replacement for SSL-LX20465LGD in existing circuit designs?

A: Yes. All electrical parameters, mechanical dimensions, and performance characteristics are identical. The components are functionally interchangeable in circuit applications. The only difference is packaging format (bulk versus tape/reel).

Q: What does the packaging difference mean for assembly operations?

A: SSL-LX20465LGD arrives in tape/reel format, suitable for automated pick-and-place assembly equipment. SSL-LX20465GD arrives in bulk packaging, requiring manual handling or compatible bulk feeding systems. Both formats contain the same component.

Q: Are there any compliance or certification differences between these parts?

A: No. Both SSL-LX20465LGD and SSL-LX20465GD carry identical ROHS3 compliance, REACH unaffected status, and MSL 1 (unlimited) moisture sensitivity rating. They meet the same regulatory requirements.

Q: Why would I choose one part over the other if they are electrically identical?

A: Selection depends on procurement needs and assembly capabilities. Choose based on packaging format compatibility with your assembly process and inventory availability requirements. SSL-LX20465GD offers higher stock availability.

Q: Do these parts have the same forward voltage and brightness characteristics?

A: Yes. Both components specify 2.2V typical forward voltage, 20mA test current, 10mcd brightness rating, and 565nm peak wavelength. Optical and electrical performance are identical.

Q: What is the significance of the T-2mm taper body specification?

A: The T-2mm taper body is the physical form factor of the LED. Both parts use this identical package style, ensuring mechanical compatibility with PCB footprints and through-hole mounting requirements.