Request Quote
(Ships tomorrow)
SSHB10HS-06140 Common Mode Choke Equivalent & Substitute Parts
Part Overview
The SSHB10HS-06140 is a 2-line common mode choke manufactured by KEMET, rated for 14 mH inductance at 10 kHz with 600 mA maximum current capacity. This through-hole component features a DC resistance of 1.17 Ohm and operates across a temperature range of -25°C to 130°C. The part is ROHS3 compliant and maintains active product status. Substitute parts are identified when equivalent electrical performance can be achieved through alternative inductance values, current ratings, or physical form factors while maintaining compatibility with standard through-hole mounting applications and 250V AC voltage specifications.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Inductance @ 10 kHz | 14 | mH |
| Current Rating (Max) | 600 | mA |
| DC Resistance (Max) | 1.17 | Ohm |
| Voltage Rating - AC | 250 | V |
| Operating Temperature Range | -25 to 130 | °C |
| Number of Lines | 2 | — |
| Mounting Type | Through Hole | — |
| Package / Case | Vertical, 4 PC Pin | — |
| RoHS Status | ROHS3 Compliant | — |
Substitute Part Grouping Explanation
Substitute parts for the SSHB10HS-06140 are classified based on the following criteria:
Primary Substitution Parameters:
- Number of Lines: 2 (all substitutes maintain this specification)
- Mounting Type: Through Hole (all substitutes use through-hole mounting)
- Voltage Rating - AC: 250V (all substitutes rated for 250V AC)
- RoHS Status: ROHS3 Compliant (all substitutes maintain compliance)
- Current Rating: 600 mA or higher (substitutes rated at 600 mA or 700 mA are acceptable)
- DC Resistance: Comparable range (1.03 Ohm to 1.3 Ohm)
Substitution Logic: Substitute parts are grouped into two categories based on current rating compatibility:
-
600 mA Current Rating Group (direct current compatibility): SSHB10H-R06400, SSHB10HS-R06330, SSR10H-06475, SSR10HS-06385, SSR10V-06475, SSR10VS-06385
-
700 mA Current Rating Group (higher current capacity): SSHB21H-R07700, SSHB21HS-07267, SSHB21HS-R07550, SSR21NH-M07890
Inductance values vary across substitutes (14 mH to 89 mH at 10 kHz) to accommodate different circuit filtering requirements. Physical dimensions differ between series (SSHB10HS, SSHB10H, SSHB21H, SSR) but all maintain vertical 4-pin through-hole package configuration.
Parameter Comparison
| Part Number | Series | Inductance @ 10 kHz (mH) | Current Rating (mA) | DCR (Ohm) | Operating Temp (°C) | Size L x W (mm) | Height (mm) | Inventory (Pcs) |
|---|---|---|---|---|---|---|---|---|
| SSHB10HS-06140 | SSHB10HS | 14 | 600 | 1.17 | -25 to 130 | 22.00 x 17.00 | 15.50 | 849 |
| SSHB10H-R06400 | SSHB10H | 40 | 600 | 1.3 | -25 to 120 | 22.00 x 17.00 | 15.50 | 954 |
| SSHB10HS-R06330 | SSHB10HS | 33 | 600 | 1.17 | -25 to 120 | 22.00 x 17.00 | 15.50 | 1071 |
| SSHB21H-R07700 | SSHB21H | 70 | 700 | 1.16 | -25 to 120 | 26.00 x 23.00 | 15.50 | 890 |
| SSHB21HS-07267 | SSHB21HS | 26.7 | 700 | 1.03 | -25 to 120 | 26.00 x 23.00 | 15.50 | 1005 |
| SSHB21HS-R07550 | SSHB21HS | 55 | 700 | 1.03 | -25 to 120 | 26.00 x 23.00 | 15.50 | 973 |
| SSR10H-06475 | SSR | 47.5 | 600 | 1.3 | -25 to 120 | Not specified | 13.50 | 1108 |
| SSR10HS-06385 | SSR | 38.5 | 600 | 1.2 | -25 to 120 | Not specified | 13.50 | 1130 |
| SSR10V-06475 | SSR | 47.5 | 600 | 1.3 | -25 to 120 | 23.50 x 13.00 | 21.00 | 704 |
| SSR10VS-06385 | SSR | 38.5 | 600 | 1.2 | -25 to 120 | 23.50 x 13.00 | 21.00 | 870 |
| SSR21NH-M07890 | SSR | 89 | 700 | 1.05 | -25 to 120 | 23.00 x 23.00 | 14.50 | 1362 |
Engineering Selection Recommendations
For 600 mA Applications (Direct Current Compatibility):
SSHB10HS-R06330 provides the closest electrical match to SSHB10HS-06140, maintaining identical series designation, DC resistance of 1.17 Ohm, and physical footprint (22.00 x 17.00 mm). Inductance increases to 33 mH at 10 kHz. Operating temperature range reduces to -25°C to 120°C. ROHS3 compliance and active product status are maintained. Inventory availability is 1071 pieces.
SSHB10H-R06400 offers higher inductance (40 mH) within the same current rating and physical dimensions. DC resistance increases to 1.3 Ohm. Series designation changes from SSHB10HS to SSHB10H. ROHS3 compliance and active status confirmed. Inventory: 954 pieces.
SSR10HS-06385 and SSR10H-06475 represent alternative series options with reduced height (13.50 mm vs. 15.50 mm). Inductance values range from 38.5 mH to 47.5 mH. DC resistance values 1.2 to 1.3 Ohm. ROHS3 compliant and active. Inventory availability exceeds 1100 pieces for both variants.
SSR10VS-06385 and SSR10V-06475 provide increased height (21.00 mm) with modified length and width dimensions (23.50 x 13.00 mm). Electrical specifications match SSR10HS and SSR10H series respectively. ROHS3 compliant. Inventory: 704 to 870 pieces.
For 700 mA Applications (Higher Current Capacity):
SSHB21HS-07267 operates at 700 mA with reduced DC resistance (1.03 Ohm) and moderate inductance (26.7 mH). Physical dimensions increase to 26.00 x 23.00 mm. ROHS3 compliant and active. Inventory: 1005 pieces.
SSHB21HS-R07550 maintains 700 mA rating with 55 mH inductance and 1.03 Ohm DCR. Identical physical footprint to SSHB21HS-07267. ROHS3 compliant. Inventory: 973 pieces.
SSHB21H-R07700 provides highest inductance in SSHB series (70 mH) at 700 mA with 1.16 Ohm DCR. Physical dimensions 26.00 x 23.00 mm. ROHS3 compliant and active. Inventory: 890 pieces.
SSR21NH-M07890 delivers maximum inductance (89 mH) at 700 mA with lowest DCR (1.05 Ohm) among all substitutes. Compact footprint (23.00 x 23.00 mm) with reduced height (14.50 mm). ROHS3 compliant and active. Highest inventory availability: 1362 pieces.
All substitute parts maintain ROHS3 compliance, 250V AC voltage rating, 2-line configuration, vertical 4-pin through-hole package, and active product status.
Frequently Asked Questions (FAQ)
Q: Can SSHB10HS-06140 be directly replaced with SSHB10HS-R06330?
A: Yes. Both parts share identical series designation (SSHB10HS), DC resistance (1.17 Ohm), physical dimensions (22.00 x 17.00 mm height 15.50 mm), current rating (600 mA), and mounting configuration (through-hole vertical 4-pin). Inductance increases from 14 mH to 33 mH at 10 kHz. Operating temperature range reduces from -25°C to 130°C to -25°C to 120°C. ROHS3 compliance is maintained.
Q: What is the difference between 600 mA and 700 mA rated substitutes?
A: 600 mA rated substitutes (SSHB10H-R06400, SSHB10HS-R06330, SSR10H-06475, SSR10HS-06385, SSR10V-06475, SSR10VS-06385) maintain the original current specification of SSHB10HS-06140. 700 mA rated substitutes (SSHB21H-R07700, SSHB21HS-07267, SSHB21HS-R07550, SSR21NH-M07890) provide higher current capacity and are suitable for applications requiring increased current handling. Selection depends on circuit current requirements.
Q: How do physical dimensions affect substitution?
A: SSHB10HS-06140 measures 22.00 x 17.00 mm with 15.50 mm height. SSHB10H and SSHB10HS series maintain these dimensions. SSHB21H and SSHB21HS series increase to 26.00 x 23.00 mm with identical height. SSR series variants offer reduced height (13.50 mm) or increased height (21.00 mm) with modified length and width. Physical compatibility depends on PCB layout constraints and available mounting space.
Q: Are all substitutes ROHS3 compliant?
A: Yes. All listed substitute parts maintain ROHS3 compliance status, matching the original SSHB10HS-06140 specification.
Q: What inductance range is available across substitutes?
A: Inductance values at 10 kHz range from 14 mH (original part) to 89 mH (SSR21NH-M07890). Intermediate values include 26.7 mH, 33 mH, 38.5 mH, 40 mH, 47.5 mH, 55 mH, and 70 mH. Selection depends on circuit filtering requirements and frequency response specifications.
Q: How does DC resistance vary among substitutes?
A: DC resistance ranges from 1.03 Ohm (SSHB21HS series and SSR21NH-M07890) to 1.3 Ohm (SSHB10H-R06400 and SSR10H-06475). Original SSHB10HS-06140 specifies 1.17 Ohm. Lower DCR values reduce power dissipation; higher values may increase heat generation in high-current applications.
Q: What is the operating temperature difference between original and substitutes?
A: SSHB10HS-06140 operates from -25°C to 130°C. All substitute parts operate from -25°C to 120°C, representing a 10°C reduction in maximum operating temperature. Applications requiring operation above 120°C must use the original part.
Q: Can SSR series parts replace SSHB series parts?
A: SSR series parts share identical electrical specifications (2-line configuration, 250V AC rating, through-hole mounting, ROHS3 compliance) but differ in physical dimensions and height. SSR10 series offers reduced height (13.50 mm) compared to SSHB10 series (15.50 mm). SSR10V series provides increased height (21.00 mm). Substitution is possible if PCB layout accommodates dimensional changes.
Q: Which substitute offers the best inventory availability?
A: SSR21NH-M07890 provides the highest inventory level at 1362 pieces. SSR10HS-06385 and SSR10H-06475 each exceed 1100 pieces. SSHB10HS-R06330 maintains 1071 pieces. Original SSHB10HS-06140 has 849 pieces in stock.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts