Request Quote
(Ships tomorrow)
SSHB10H-06171 Common Mode Choke Equivalent & Substitute Parts
Part Overview
The SSHB10H-06171 is a 2-line common mode choke manufactured by KEMET, rated for 17.1 mH inductance at 10 kHz with 600 mA maximum current capacity. This through-hole component features a DC resistance of 1.3 Ohm and operates across the temperature range of -25°C to 130°C. The part is ROHS3 compliant and maintains active product status.
Substitute parts are identified when design requirements permit variation in inductance value, physical dimensions, or DC resistance while maintaining compatibility with the 2-line common mode choke application, 600 mA current rating, 250V AC voltage rating, and through-hole mounting configuration.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Manufacturer Part Number | SSHB10H-06171 | — |
| Manufacturer | KEMET | — |
| Series | SSHB10H | — |
| Number of Lines | 2 | — |
| Inductance @ 10 kHz | 17.1 | mH |
| Current Rating (Max) | 600 | mA |
| DC Resistance (Max) | 1.3 | Ohm |
| Voltage Rating (AC) | 250 | V |
| Operating Temperature Range | -25 to 130 | °C |
| Mounting Type | Through Hole | — |
| Package / Case | Vertical, 4 PC Pin | — |
| RoHS Status | ROHS3 Compliant | — |
| Product Status | Active | — |
Substitute Part Grouping Explanation
Substitute parts for the SSHB10H-06171 are grouped based on the following substitution criteria:
Primary Compatibility Parameters:
- Number of Lines: 2 (fixed requirement)
- Mounting Type: Through Hole (fixed requirement)
- Current Rating: 600 mA or higher (allows equal or greater capacity)
- Voltage Rating (AC): 250 V (fixed requirement)
- Package Configuration: Vertical, 4 PC Pin (fixed requirement)
- RoHS Status: ROHS3 Compliant (fixed requirement)
- Product Status: Active (fixed requirement)
Variable Parameters (Substitution Allowed):
- Inductance @ 10 kHz: 17.1 mH to 82.5 mH range
- DC Resistance (Max): 1.17 Ohm to 1.5 Ohm range
- Physical Dimensions: Two size classes permitted (22.00mm × 17.00mm or 26.00mm × 23.00mm)
- Operating Temperature Range: -25°C to 120°C or -25°C to 130°C
- Series: SSHB10H, SSHB10HS, SSHB21H, SSHB21HS, SSR10H, SSR10HS, SSR10V
Substitution is valid when the application permits higher inductance values and the component maintains all fixed parameters listed above.
Parameter Comparison
| Part Number | Series | Inductance @ 10 kHz (mH) | Current Rating (mA) | DCR Max (Ohm) | Size L × W (mm) | Height Max (mm) | Temp Range (°C) | Inventory (Pcs) |
|---|---|---|---|---|---|---|---|---|
| SSHB10H-06171 | SSHB10H | 17.1 | 600 | 1.3 | 22.00 × 17.00 | 15.50 | -25 to 130 | 835 |
| SSHB10H-R06400 | SSHB10H | 40 | 600 | 1.3 | 22.00 × 17.00 | 15.50 | -25 to 120 | 954 |
| SSHB10HS-R06330 | SSHB10HS | 33 | 600 | 1.17 | 22.00 × 17.00 | 15.50 | -25 to 120 | 1071 |
| SSHB21H-06400 | SSHB21H | 40 | 600 | 1.5 | 26.00 × 23.00 | 15.50 | -25 to 120 | 1138 |
| SSHB21H-R06825 | SSHB21H | 82.5 | 600 | 1.5 | 26.00 × 23.00 | 15.50 | -25 to 120 | 901 |
| SSHB21H-R07700 | SSHB21H | 70 | 700 | 1.16 | 26.00 × 23.00 | 15.50 | -25 to 120 | 890 |
| SSHB21HS-06378 | SSHB21HS | 37.8 | 600 | 1.48 | 26.00 × 23.00 | 15.50 | -25 to 120 | 854 |
| SSHB21HS-R06780 | SSHB21HS | 78 | 600 | 1.48 | 26.00 × 23.00 | 15.50 | -25 to 120 | 844 |
| SSR10H-06475 | SSR | 47.5 | 600 | 1.3 | Not specified | 13.50 | -25 to 120 | 1108 |
| SSR10HS-06385 | SSR | 38.5 | 600 | 1.2 | Not specified | 13.50 | -25 to 120 | 1130 |
| SSR10V-06475 | SSR | 47.5 | 600 | 1.3 | 23.50 × 13.00 | 21.00 | -25 to 120 | 704 |
Engineering Selection Recommendations
Same-Series Substitutes (SSHB10H Series):
SSHB10H-R06400 maintains identical physical footprint (22.00mm × 17.00mm), DC resistance (1.3 Ohm), and current rating (600 mA) as the SSHB10H-06171. The inductance increases from 17.1 mH to 40 mH. This part is suitable for applications where higher inductance filtering is required within the same form factor. Operating temperature range reduces to -25°C to 120°C.
Compact Footprint Alternative (SSHB10HS Series):
SSHB10HS-R06330 provides 33 mH inductance with reduced DC resistance (1.17 Ohm) and maintains the 22.00mm × 17.00mm footprint. This option is appropriate when lower insertion loss is prioritized. Operating temperature range is -25°C to 120°C.
Larger Footprint Options (SSHB21H and SSHB21HS Series):
Parts in the SSHB21H and SSHB21HS series offer inductance values from 37.8 mH to 82.5 mH with larger physical dimensions (26.00mm × 23.00mm). These are suitable for applications with available board space and higher inductance requirements. SSHB21H-R07700 provides 700 mA current capacity, exceeding the base 600 mA rating.
Compact Height Alternatives (SSR Series):
SSR10H-06475 and SSR10HS-06385 provide reduced height (13.50mm) compared to the main part (15.50mm). These are applicable in space-constrained vertical designs. SSR10V-06475 offers alternative height profile (21.00mm) with different length and width dimensions (23.50mm × 13.00mm).
Compliance and Status:
All substitute parts maintain ROHS3 compliance, active product status, 250V AC voltage rating, 2-line configuration, through-hole mounting, and vertical 4 PC pin package. Selection should be based on specific inductance, DC resistance, and physical dimension requirements of the target application.
Frequently Asked Questions (FAQ)
Q: Can SSHB10H-R06400 replace SSHB10H-06171 in all applications?
A: SSHB10H-R06400 is a direct physical substitute with identical footprint and current rating. Substitution is valid only if the application permits inductance increase from 17.1 mH to 40 mH. The operating temperature range is reduced from -25°C to 130°C to -25°C to 120°C; verify this meets application requirements.
Q: What is the difference between SSHB10HS-R06330 and SSHB10H-R06400?
A: Both maintain the 22.00mm × 17.00mm footprint. SSHB10HS-R06330 provides 33 mH inductance with lower DC resistance (1.17 Ohm), while SSHB10H-R06400 provides 40 mH inductance with DC resistance of 1.3 Ohm. Selection depends on whether lower insertion loss or higher inductance is required.
Q: Can I use SSHB21H series parts as substitutes for SSHB10H-06171?
A: SSHB21H series parts are physically larger (26.00mm × 23.00mm versus 22.00mm × 17.00mm) and provide higher inductance values (40 mH to 82.5 mH). Substitution is valid only if the application has available board space and requires the higher inductance values. All other electrical parameters remain compatible.
Q: What are the advantages of SSR series parts?
A: SSR10H-06475 and SSR10HS-06385 offer reduced height (13.50mm) compared to SSHB series parts (15.50mm). This is beneficial for applications with vertical space constraints. SSR10V-06475 provides an alternative height profile (21.00mm) with different length and width dimensions for specific layout requirements.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All listed substitute parts maintain ROHS3 compliance, matching the compliance status of SSHB10H-06171.
Q: What is the impact of DC resistance variation among substitutes?
A: DC resistance ranges from 1.17 Ohm (SSHB10HS-R06330) to 1.5 Ohm (SSHB21H series). Lower DC resistance reduces insertion loss and heat generation; higher DC resistance increases insertion loss. Selection should align with thermal and efficiency requirements of the target application.
Q: Can I substitute based on inductance value alone?
A: No. Substitution requires compatibility across all fixed parameters: 2-line configuration, 600 mA or higher current rating, 250V AC voltage rating, through-hole mounting, vertical 4 PC pin package, ROHS3 compliance, and active product status. Physical dimensions and DC resistance must also be verified for the specific application.
Q: What is the inventory status of substitute parts?
A: All substitute parts listed maintain active inventory status with quantities ranging from 704 to 1138 pieces. Verify current availability with the supplier before design finalization.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts