LED Circuit Board Indicator SSF-LXH100MLID Equivalent & Substitute Parts

Part Overview

The SSF-LXH100MLID is a single red LED circuit board indicator manufactured by Lumex Opto/Components Inc. This component is a through-hole, right-angle mounted indicator with a 5mm diffused, tinted lens and domed top. The part is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product family, ensuring functional interchangeability in circuit board applications without design modification.

Substiute Parts

SSF-LXH100MLID

Lumex Opto/Components Inc.In Stock: 1042SSF-LXH100MLID Datasheet

Current PartRFQ

SSF-LXH100MID

Lumex Opto/Components Inc.In Stock: 4933SSF-LXH100MID Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SSF-LXH100MLID are identified based on strict equivalence of the following critical parameters:

Electrical Parameters:

• Voltage Rating: 2V
• Current Rating: 20mA
• Millicandela Rating: 30mcd
• Wavelength - Peak: 635nm (Red)

Mechanical Parameters:

• Lens Size: 5mm, T-1 3/4
• Lens Type: Diffused, Tinted
• Lens Style: Round with Domed Top
• Mounting Type: Through Hole, Right Angle
• Configuration: Single

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these criteria are classified as direct substitutes within the SSF-LXH100 base product family. Substitution is valid only when all parameters match exactly.

Parameter Comparison

Engineering Selection Recommendations

Both SSF-LXH100MLID and SSF-LXH100MID are Active status products manufactured by Lumex Opto/Components Inc. and maintain identical electrical, mechanical, and compliance specifications. Selection between these parts is based on inventory availability and procurement requirements.

SSF-LXH100MLID: 971 pieces in stock. Primary selection when available.

SSF-LXH100MID: 4921 pieces in stock. Recommended for high-volume procurement or when primary part availability is limited.

Both parts satisfy ROHS3 compliance and REACH unaffected status requirements. Moisture sensitivity level 1 (Unlimited) indicates no special storage or handling requirements. Direct substitution is valid without circuit design modification.

Frequently Asked Questions (FAQ)

Q: Can SSF-LXH100MID be used as a direct replacement for SSF-LXH100MLID?

A: Yes. Both parts share identical electrical parameters (2V, 20mA, 30mcd, 635nm), mechanical specifications (5mm T-1 3/4 through-hole right-angle mount, diffused tinted domed lens), and compliance certifications (ROHS3, REACH unaffected). Direct substitution is valid without circuit modification.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by equivalence in voltage rating (2V), current rating (20mA), millicandela output (30mcd), wavelength (635nm red), lens size and type (5mm diffused tinted domed), mounting configuration (through-hole right-angle), and compliance status (ROHS3, REACH unaffected).

Q: Are there any packaging differences between SSF-LXH100MLID and SSF-LXH100MID?

A: Both parts are supplied in Bulk packaging. No packaging format differences exist between the two part numbers.

Q: What is the significance of the base product number SSF-LXH100?

A: The base product number SSF-LXH100 identifies the core product family. Both SSF-LXH100MLID and SSF-LXH100MID are variants within this family, sharing the same fundamental design and specifications.

Q: Are moisture sensitivity considerations relevant for these parts?

A: No. Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture-related storage, handling, or reflow restrictions apply.