SSB11H-R13090 Equivalent & Substitute Parts

Part Overview

The SSB11H-R13090 is a 9 mH Common Mode Choke (CMC) designed for power line filtering applications. This through-hole mounted component operates at 1.3A maximum current with a DC resistance of 380 mOhm and supports 250V AC voltage rating. The part is manufactured by KEMET in the SS series and maintains Active product status. Alternative equivalent parts may be required due to inventory availability, specific mounting geometry requirements, or application-specific form factor constraints.

Substiute Parts

SSB11H-R13090

KEMETIn Stock: 1006SSB11H-R13090 Datasheet

Current PartRFQ

SSB11V-R13090

KEMETIn Stock: 1806SSB11V-R13090 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SSB11H-R13090 is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Inductance value: 9 mH @ 1 kHz
• Number of lines: 2 (Common Mode Choke configuration)
• Current rating: 1.3A maximum
• DC resistance: 380 mOhm maximum
• AC voltage rating: 250V
• Operating temperature range: -25°C ~ 130°C

Mechanical Parameters (Form Factor Dependent):

• Mounting type: Through Hole
• Package configuration: Vertical, 4 PC Pin
• Physical dimensions and height

Compliance Parameters:

• RoHS3 compliance
• REACH unaffected status
• ECCN: EAR99
• HTSUS: 8504.31.4065

The SSB11V-R13090 qualifies as a parametric equivalent because it maintains identical electrical specifications across all critical parameters. Dimensional differences exist in the physical footprint (length, width, and height), which may affect PCB layout compatibility but do not alter electrical performance or functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Electrical Equivalence: Both SSB11H-R13090 and SSB11V-R13090 are electrically identical. They deliver the same 9 mH inductance at 1 kHz, support 1.3A current, maintain 380 mOhm DC resistance, and operate across the -25°C to 130°C temperature range. Selection between these parts does not affect circuit performance or electrical specifications.

Compliance & Regulatory: Both parts maintain ROHS3 compliance, REACH unaffected status, and identical ECCN/HTSUS classifications. No regulatory or compliance barriers exist for substitution.

Physical Form Factor: The primary distinction between these parts is dimensional. The SSB11H-R13090 measures 21.00mm L x 20.50mm W x 16.00mm H, while the SSB11V-R13090 measures 22.00mm L x 14.50mm W x 21.50mm H. PCB layout compatibility must be verified against available board space and component placement constraints. Both maintain identical through-hole, vertical 4-pin configurations.

Inventory & Availability: SSB11V-R13090 maintains higher inventory (1717 pcs) compared to SSB11H-R13090 (917 pcs), which may influence selection based on supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Are SSB11H-R13090 and SSB11V-R13090 electrically interchangeable?

A: Yes. Both parts deliver identical electrical performance: 9 mH inductance at 1 kHz, 1.3A current rating, 380 mOhm DC resistance, and 250V AC voltage rating. They operate across the same temperature range (-25°C to 130°C) and are suitable for identical power line filtering applications.

Q: What is the difference between these two parts?

A: The parts differ only in physical dimensions and height. SSB11H-R13090 is more compact (21.00mm x 20.50mm x 16.00mm), while SSB11V-R13090 is taller (22.00mm x 14.50mm x 21.50mm). Both use through-hole vertical 4-pin mounting.

Q: Can I substitute SSB11V-R13090 for SSB11H-R13090 on my PCB?

A: Electrical substitution is valid. However, physical compatibility depends on available PCB space. Verify that the SSB11V-R13090's dimensions (particularly the 21.50mm height) fit within your board layout constraints before implementation.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SSB11H-R13090 and SSB11V-R13090 are ROHS3 compliant, REACH unaffected, and share identical ECCN (EAR99) and HTSUS (8504.31.4065) classifications.

Q: Which part should I choose if both are available?

A: Selection depends on PCB layout requirements. If space permits the taller profile, SSB11V-R13090 offers higher inventory availability (1717 pcs vs. 917 pcs). If board height is constrained, SSB11H-R13090 is the more compact option. Electrical performance is identical.

Q: Are there any thermal or frequency-dependent differences?

A: No. Both parts maintain identical operating temperature ranges (-25°C to 130°C) and inductance specifications (9 mH @ 1 kHz). Thermal and frequency performance are equivalent.