SSA-LXB102ID LED Circuit Board Indicator - Equivalent & Substitute Parts

Part Overview

The SSA-LXB102ID is a 10-segment LED circuit board indicator manufactured by Lumex Opto/Components Inc. This component features a 3.00mm diameter round lens with flat top configuration, designed for through-hole mounting applications. The part is classified as obsolete, which necessitates identification of functionally equivalent substitute components for ongoing design and procurement requirements. The SSA-LXB102ID operates at 2V with 30mA current consumption and delivers 8mcd luminous intensity at a peak wavelength of 635nm (red spectrum).

Substiute Parts

SSA-LXB102ID

Lumex Opto/Components Inc.In Stock: 978SSA-LXB102ID Datasheet

Current PartRFQ

SSA-LXH1025ID

Lumex Opto/Components Inc.In Stock: 1872SSA-LXH1025ID Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SSA-LXB102ID is determined by the following critical parameters:

Electrical Compatibility Parameters:

• Voltage Rating: 2V (exact match required)
• Current: 30mA (exact match required)
• Wavelength - Peak: 635nm (red spectrum, exact match required)
• Configuration: 10-segment LED array (exact match required)

Mechanical Compatibility Parameters:

• Mounting Type: Through Hole (exact match required)
• Lens Type: Diffused, Tinted (exact match required)

Regulatory & Environmental Parameters:

• RoHS Status: ROHS3 Compliant (minimum requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
• REACH Status: REACH Unaffected (exact match required)

The SSA-LXH1025ID qualifies as a substitute based on matching all critical electrical parameters (2V, 30mA, 635nm, 10-segment configuration), mounting type (through hole), lens type (diffused, tinted), and regulatory compliance. Variations in physical lens dimensions (5.00mm x 2.50mm rectangular versus 3.00mm round), millicandela rating (10mcd versus 8mcd), and viewing angle (110° versus 80°) are permissible within the substitution framework, provided the application accommodates these mechanical and optical differences.

Parameter Comparison

Engineering Selection Recommendations

The SSA-LXH1025ID is the designated substitute for the obsolete SSA-LXB102ID. Selection of this substitute is supported by the following engineering criteria:

Electrical Equivalence: Both components operate at identical voltage (2V) and current (30mA) specifications with matching peak wavelength (635nm), ensuring direct electrical compatibility in circuit designs.

Regulatory Compliance: The SSA-LXH1025ID maintains ROHS3 compliance and REACH unaffected status, meeting the same environmental and regulatory requirements as the original part.

Product Status Advantage: The substitute part is classified as active, ensuring continued availability and supply chain stability compared to the obsolete status of the SSA-LXB102ID.

Mechanical Accommodation: While the SSA-LXH1025ID features a rectangular lens (5.00mm x 2.50mm) compared to the round 3.00mm lens of the original part, this variation requires PCB layout and mechanical housing adjustment. The increased millicandela rating (10mcd versus 8mcd) and wider viewing angle (110° versus 80°) provide enhanced optical performance characteristics.

Substitution Validity: The SSA-LXH1025ID satisfies all mandatory electrical, regulatory, and functional parameters required for substitution within the 10-segment red LED indicator category.

Frequently Asked Questions (FAQ)

Q: Can the SSA-LXH1025ID be used as a direct drop-in replacement for the SSA-LXB102ID?

A: Electrical substitution is valid. However, mechanical accommodation is required due to lens geometry differences. The SSA-LXH1025ID features a 5.00mm x 2.50mm rectangular lens versus the 3.00mm round lens of the original part. PCB footprint and mechanical housing modifications are necessary.

Q: What are the critical parameters that determine substitution eligibility?

A: Substitution is determined by matching voltage rating (2V), current consumption (30mA), peak wavelength (635nm), 10-segment configuration, through-hole mounting type, diffused tinted lens type, and regulatory compliance (ROHS3, REACH unaffected, MSL 1).

Q: Are there differences in optical performance between these parts?

A: Yes. The SSA-LXH1025ID provides 10mcd luminous intensity compared to 8mcd for the SSA-LXB102ID, and features a 110° viewing angle versus 80°. These represent performance enhancements suitable for applications requiring increased brightness or wider viewing angles.

Q: What is the inventory status of these components?

A: The SSA-LXB102ID (obsolete) has 903 pieces in stock. The SSA-LXH1025ID (active) has 1803 pieces in stock, providing superior supply availability.

Q: Are both parts manufactured by the same company?

A: Yes. Both the SSA-LXB102ID and SSA-LXH1025ID are manufactured by Lumex Opto/Components Inc., ensuring consistent quality standards and design philosophy.

Q: What packaging format is used for the substitute part?

A: The SSA-LXH1025ID is supplied in bulk packaging, suitable for high-volume assembly operations.