SS-73100-007 Modular Connector Equivalent & Substitute Parts

Part Overview

The SS-73100-007 is an 8p8c (RJ45/Ethernet) modular jack connector manufactured by Stewart Connector. This right-angle shielded connector features through-hole solder termination with EMI finger shielding and is rated for Cat5e applications. The part is currently active in production with 1167 units in stock. Alternative equivalent parts may be required due to supply constraints, lead time considerations, or specific application requirements within the allowed electrical and mechanical parameter ranges.

Substiute Parts

SS-73100-007

Stewart ConnectorIn Stock: 1240SS-73100-007 Datasheet

Current PartRFQ

5569262-1

TE Connectivity AMP ConnectorsIn Stock: 24675569262-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 5569262-1 (TE Connectivity AMP Connectors) qualifies as an equivalent based on the following critical parameters:

• Connector Type & Configuration: Both are 8p8c jack modular connectors with identical contact arrangement
• Orientation & Mounting: Both feature 90° right-angle orientation with through-hole solder termination
• Shielding: Both incorporate shielded design with EMI finger protection
• Electrical Rating: Main part rated Cat5e; substitute rated Cat5. Both support the same contact count and electrical interface
• Physical Dimensions: Both maintain identical port count (8), row configuration (2), and tab direction (Up and Down)
• Operating Environment: Identical temperature range (-40°C to 85°C) and MSL rating (1 - Unlimited)
• Contact Finish: Both use gold plating at 50.0µin (1.27µm) thickness
• Compliance: Both are RoHS compliant and REACH unaffected

Differences in contact material (Copper Alloy vs. Phosphor Bronze) and housing material (Thermoplastic vs. PCT/Polyester) do not affect functional substitution within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain active product status and full compliance with applicable regulations. The SS-73100-007 is ROHS3 compliant, while the 5569262-1 is RoHS compliant. Both are REACH unaffected and classified under identical ECCN and HTSUS codes, indicating equivalent regulatory standing for export and trade purposes.

Selection between these parts should be based on availability, lead time, packaging format (Tray vs. Bulk), and inventory levels. The Stewart Connector part (SS-73100-007) is currently available in 1167 units; the TE Connectivity part (5569262-1) is available in 2391 units. Both connectors support identical electrical interfaces and mechanical mounting configurations within the specified parameter ranges.

Frequently Asked Questions (FAQ)

Q: Can 5569262-1 be used as a direct replacement for SS-73100-007?

A: Yes. Both connectors share identical contact configuration (8p8c), orientation (90° right-angle), mounting method (through-hole solder), shielding design (EMI finger), operating temperature range (-40°C to 85°C), and contact finish specifications (gold, 50.0µin). The electrical and mechanical parameters that determine substitution compatibility are equivalent.

Q: What is the difference in electrical rating between Cat5e and Cat5?

A: The main part is rated Cat5e; the substitute is rated Cat5. Both ratings support 8p8c modular jack configurations. The Cat5e rating provides higher performance specifications, but both parts function within the same contact arrangement and electrical interface parameters.

Q: Does the difference in contact material affect substitution?

A: Contact material differences (Copper Alloy vs. Phosphor Bronze) do not affect functional substitution. Both materials support the specified gold plating finish thickness (50.0µin) and maintain compatibility within the defined electrical and mechanical parameters.

Q: What is the significance of packaging format (Tray vs. Bulk)?

A: Packaging format affects handling, storage, and order quantities but does not impact electrical or mechanical compatibility. Tray packaging typically supports smaller order quantities; Bulk packaging is used for larger volume orders.

Q: Are both parts suitable for the same PCB assembly process?

A: Yes. Both connectors use identical through-hole solder termination, support the same board guide features, and maintain identical tab direction (Up and Down). They are compatible with standard PCB assembly processes for modular connectors.