Request Quote
(Ships tomorrow)
SS65100-019F Equivalent & Substitute Parts
Part Overview
The SS65100-019F is a modular jack connector manufactured by Stewart Connector, featuring a 10p8c vertical unshielded configuration with through-hole solder termination. This component is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity. The part's vertical orientation and unshielded design define its primary application parameters.
Substiute Parts
Key Parameters
| Parameter | SS65100-019F |
|---|---|
| Connector Type | Jack |
| Number of Positions/Contacts | 10p8c |
| Number of Ports | 1 |
| Number of Rows | 1 |
| Mounting Type | Through Hole |
| Orientation | Vertical |
| Termination | Solder |
| Shielding | Unshielded |
| Contact Material | Copper Alloy |
| Contact Finish | Gold |
| Housing Material | Thermoplastic |
| Product Status | Obsolete |
Substitute Part Grouping Explanation
Substitution of the SS65100-019F is based on the following critical parameters that must remain consistent:
- Connector Type: Jack configuration required
- Contact Configuration: 10p8c (10 positions, 8 contacts) mandatory
- Port Count: Single port (1)
- Row Configuration: Single row (1)
- Mounting Method: Through-hole solder termination
- Termination Type: Solder connection
The A-20042-LPS from Assmann WSW Components satisfies these core functional requirements. However, this substitute introduces design modifications in orientation (90° angle right versus vertical) and shielding (shielded versus unshielded). These differences must be evaluated against specific application requirements.
Parameter Comparison
| Parameter | SS65100-019F | A-20042-LPS |
|---|---|---|
| Manufacturer | Stewart Connector | Assmann WSW Components |
| Connector Type | Jack | Jack |
| Number of Positions/Contacts | 10p8c | 10p8c |
| Number of Ports | 1 | 1 |
| Number of Rows | 1 | 1 |
| Mounting Type | Through Hole | Through Hole |
| Orientation | Vertical | 90° Angle (Right) |
| Termination | Solder | Solder |
| Shielding | Unshielded | Shielded |
| Contact Material | Copper Alloy | Phosphor Bronze |
| Contact Finish | Gold | Gold |
| Housing Material | Thermoplastic | Polybutylene Terephthalate (PBT) |
| Product Status | Obsolete | Active |
| Operating Temperature | Not Specified | -40°C ~ 85°C |
| RoHS Status | Not Specified | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | Not Applicable | 1 (Unlimited) |
Engineering Selection Recommendations
The A-20042-LPS serves as the manufacturer-recommended substitute for the obsolete SS65100-019F. Selection of this alternative is justified by the following factors:
Product Status: The A-20042-LPS maintains active production status, ensuring long-term availability and supply chain continuity compared to the obsolete SS65100-019F.
Compliance and Certifications: The A-20042-LPS is ROHS3 compliant and carries REACH unaffected status, meeting current regulatory requirements for electronic component procurement.
Functional Compatibility: Both connectors maintain identical 10p8c contact configuration, single-port single-row architecture, and solder termination methodology, ensuring electrical interface compatibility.
Design Modifications: Implementation of the A-20042-LPS requires evaluation of two design changes: (1) connector orientation shifts from vertical to 90° right angle, necessitating PCB layout modification; (2) shielded design provides electromagnetic interference mitigation not present in the original unshielded configuration.
Selection of the A-20042-LPS is appropriate for applications where PCB space constraints favor right-angle mounting and where electromagnetic shielding provides functional benefit or compliance advantage.
Frequently Asked Questions (FAQ)
Q: Can the A-20042-LPS directly replace the SS65100-019F without PCB modification?
A: No. The A-20042-LPS features 90° right-angle orientation compared to the vertical orientation of the SS65100-019F. PCB layout modification is required to accommodate the different mounting geometry and connector approach angle.
Q: What is the significance of the shielded versus unshielded design difference?
A: The A-20042-LPS incorporates shielding, which attenuates electromagnetic interference. The original SS65100-019F is unshielded. Applications requiring EMI mitigation benefit from the shielded design; applications with no EMI requirements may not require this feature.
Q: Are the contact materials interchangeable?
A: Both connectors feature gold-plated contacts suitable for modular jack applications. The SS65100-019F uses copper alloy base material while the A-20042-LPS uses phosphor bronze. Both materials are standard for this connector category and provide equivalent electrical performance.
Q: What is the inventory status of the substitute part?
A: The A-20042-LPS is available in active production with 1922 pieces in stock, providing immediate procurement availability compared to the obsolete SS65100-019F.
Q: Does the substitute part meet current regulatory requirements?
A: Yes. The A-20042-LPS is ROHS3 compliant and REACH unaffected, meeting current electronic component regulatory standards. The original SS65100-019F regulatory status is not specified.
Q: Are there packaging differences between the main part and substitute?
A: The A-20042-LPS is supplied in tray packaging. Original packaging information for the SS65100-019F is not specified in available documentation.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts