SS64600-032F Equivalent & Substitute Parts

Part Overview

The SS64600-032F is a modular jack connector manufactured by Stewart Connector, designed for 6p6c (RJ11, RJ12, RJ14, RJ25) applications. This connector features a 90° right-angle orientation with shielding and EMI finger protection, suitable for through-hole mounting with solder termination. The part is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure ongoing component availability for production and maintenance applications.

Key Parameters

Parameter	Value
Connector Type	Jack
Number of Positions/Contacts	6p6c (RJ11, RJ12, RJ14, RJ25)
Orientation	90° Angle (Right)
Mounting Type	Through Hole
Termination	Solder
Shielding	Shielded, EMI Finger
Contact Material	Copper Alloy
Contact Finish	Gold
Housing Material	Thermoplastic
Operating Temperature Range	-40°C ~ 85°C
Features	Board Lock
Tab Direction	Down

Substitute Part Grouping Explanation

Substitution of the obsolete SS64600-032F is based on strict equivalence across all critical electrical and mechanical parameters. The substitute part SS-6466S-A-PG4-BA-50 maintains identical specifications for connector type, contact configuration, orientation, mounting method, termination approach, shielding design, contact material, housing material, and operating temperature range. Both parts are manufactured by Stewart Connector within the same product series (Series 64) and share the same base product number designation (SS-6466S).

The primary distinction between these parts is the contact finish thickness: the original part specifies 30.0µin (0.76µm), while the substitute provides 50.0µin (1.27µm). This increased thickness represents an enhancement in contact durability and wear resistance without altering electrical or mechanical compatibility. The substitute part is currently in active production status, whereas the original is obsolete.

Parameter Comparison

Parameter	SS64600-032F	SS-6466S-A-PG4-BA-50
Manufacturer	Stewart Connector	Stewart Connector
Connector Type	Jack	Jack
Number of Positions/Contacts	6p6c (RJ11, RJ12, RJ14, RJ25)	6p6c (RJ11, RJ12, RJ14, RJ25)
Number of Ports	1	1
Number of Rows	1	1
Mounting Type	Through Hole	Through Hole
Orientation	90° Angle (Right)	90° Angle (Right)
Termination	Solder	Solder
Shielding	Shielded, EMI Finger	Shielded, EMI Finger
Features	Board Lock	Board Lock
LED Color	Does Not Contain LED	Does Not Contain LED
Tab Direction	Down	Down
Contact Material	Copper Alloy	Copper Alloy
Contact Finish	Gold	Gold
Contact Finish Thickness	30.0µin (0.76µm)	50.0µin (1.27µm)
Housing Material	Thermoplastic	Thermoplastic
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)	Not Applicable
REACH Status	REACH Unaffected	REACH Unaffected
ECCN	EAR99	EAR99
HTSUS	8536.69.4040	8536.69.4040
Product Status	Obsolete	Active
RoHS Status	Not specified	ROHS3 Compliant

Engineering Selection Recommendations

The SS-6466S-A-PG4-BA-50 is the direct equivalent for the obsolete SS64600-032F. Both parts maintain identical electrical and mechanical specifications across all critical parameters including connector configuration, orientation, mounting method, and operating environment. The substitute part is manufactured by the same supplier and carries active product status, ensuring long-term availability and supply chain continuity.

The increased contact finish thickness in the substitute part (50.0µin versus 30.0µin) provides enhanced contact durability without introducing any compatibility concerns. The substitute part carries ROHS3 compliance certification, meeting current regulatory requirements. Both parts share identical REACH and ECCN classifications, confirming regulatory equivalence.

Frequently Asked Questions (FAQ)

Q: Can SS-6466S-A-PG4-BA-50 be used as a direct replacement for SS64600-032F?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters. They share identical connector type, contact configuration, orientation, mounting method, termination approach, shielding design, and operating temperature range. The substitute part is currently in active production.

Q: What is the difference in contact finish thickness between these parts?

A: The original part specifies 30.0µin (0.76µm) gold plating, while the substitute provides 50.0µin (1.27µm). The increased thickness enhances contact durability and wear resistance without affecting electrical or mechanical compatibility.

Q: Are there packaging differences between these parts?

A: The original part packaging is not specified in available documentation. The substitute part is supplied in tray packaging. Packaging format does not affect functional compatibility or performance.

Q: Does the substitute part meet current compliance standards?

A: Yes. The SS-6466S-A-PG4-BA-50 is ROHS3 compliant and maintains REACH Unaffected status, identical to the original part. Both parts carry the same ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: Why is the original part listed as obsolete?

A: Product obsolescence typically results from manufacturer discontinuation decisions. The substitute part represents the current active equivalent within the same product series and manufacturer line.

Q: Are the operating temperature ranges identical?

A: Yes. Both parts operate across the identical temperature range of -40°C to 85°C, ensuring thermal compatibility in all specified applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message