SS5P10HM3_A/H Equivalent & Substitute Parts

Part Overview

The SS5P10HM3_A/H is a Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 100 V DC reverse voltage and 5 A average rectified current. The device is housed in a TO-277A (SMPC) surface mount package and qualifies for automotive applications under AEC-Q101. This part is currently active in production with 51,700 units in stock.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or packaging format preferences while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Technology	Schottky	—
Voltage - DC Reverse (Vr) (Max)	100	V
Current - Average Rectified (Io)	5	A
Voltage - Forward (Vf) (Max) @ If	880	mV @ 5 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)	—
Current - Reverse Leakage @ Vr	15	µA @ 100 V
Operating Temperature - Junction	-55 to 150	°C
Package / Case	TO-277, 3-PowerDFN	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Grade	Automotive	—
Qualification	AEC-Q101	—

Substitute Part Grouping Explanation

Substitute parts for the SS5P10HM3_A/H are classified based on electrical parameter equivalence and mechanical compatibility. The substitution logic is determined by the following criteria:

Primary Equivalence Parameters:

Voltage - DC Reverse (Vr) (Max): 100 V
Current - Average Rectified (Io): 5 A
Technology: Schottky
Mounting Type: Surface Mount
Operating Temperature Range: -55°C to 150°C minimum
RoHS3 Compliance
AEC-Q101 Automotive Qualification (where applicable)

Packaging Compatibility: Substitutes are grouped into two categories based on supplier device package format: TO-277A (SMPC) variants and alternative surface mount packages (PowerDI™ 5) that maintain electrical equivalence.

Parametric Equivalent Classification: Parts designated as parametric equivalents share identical electrical specifications and automotive-grade qualification. Differences in packaging format (Tape & Reel versus Cut Tape & Digi-Reel®) do not affect electrical performance.

Direct Manufacturer Equivalent Classification: The PDS5100HQ-13 from Diodes Incorporated is classified as a direct manufacturer equivalent despite minor variations in forward voltage (710 mV versus 880 mV) and reverse leakage current (3.5 µA versus 15 µA), as these variations remain within acceptable substitution tolerances for the 100 V / 5 A Schottky rectifier category.

MFR Recommended Classification: The SV5100_R2_00001 from Panjit International Inc. is designated as manufacturer-recommended and maintains electrical equivalence with minor parameter variations within the Schottky rectifier specification envelope.

Parameter Comparison

Parameter	SS5P10HM3_A/H	SS5P10-M3/86A	SS5P10-M3/87A	SS5P10HM3_A/I	PDS5100HQ-13	SV5100_R2_00001
Manufacturer	Vishay	Vishay	Vishay	Vishay	Diodes Inc.	Panjit
Technology	Schottky	Schottky	Schottky	Schottky	Schottky	Schottky
Voltage - DC Reverse (Vr) (Max)	100 V	100 V	100 V	100 V	100 V	100 V
Current - Average Rectified (Io)	5 A	5 A	5 A	5 A	5 A	5 A
Voltage - Forward (Vf) (Max) @ If	880 mV @ 5 A	880 mV @ 5 A	880 mV @ 5 A	880 mV @ 5 A	710 mV @ 5 A	870 mV @ 5 A
Speed	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA	Fast Recovery ≤ 500ns, > 200mA
Current - Reverse Leakage @ Vr	15 µA @ 100 V	15 µA @ 100 V	15 µA @ 100 V	15 µA @ 100 V	3.5 µA @ 100 V	15 µA @ 100 V
Operating Temperature - Junction	-55 to 150°C	-55 to 150°C	-55 to 150°C	-55 to 150°C	-65 to 175°C	-55 to 150°C
Package / Case	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN	TO-277, 3-PowerDFN	PowerDI™ 5	TO-277, 3-PowerDFN
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Packaging Format	Tape & Reel (TR)	Cut Tape & Digi-Reel®	Tape & Reel (TR)	Tape & Reel (TR)	Cut Tape & Digi-Reel®	Tape & Reel (TR)
Grade	Automotive	—	—	Automotive	Automotive	—
Qualification	AEC-Q101	—	—	AEC-Q101	AEC-Q101	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Inventory (Pcs)	51,700	185,200	12,990	22,192	49,600	10,300

Engineering Selection Recommendations

Automotive-Grade Applications (AEC-Q101 Required): For designs requiring automotive qualification, select from: SS5P10HM3_A/H, SS5P10HM3_A/I, or PDS5100HQ-13. All three parts carry AEC-Q101 qualification and automotive-grade designation. SS5P10HM3_A/I provides identical electrical specifications to the primary part with higher inventory availability (22,192 units). PDS5100HQ-13 offers superior reverse leakage performance (3.5 µA) and extended operating temperature range (-65 to 175°C) with alternative PowerDI™ 5 packaging.

Standard Industrial Applications: For non-automotive applications, SS5P10-M3/86A and SS5P10-M3/87A provide parametric equivalence with identical electrical specifications. SS5P10-M3/86A offers the highest inventory level (185,200 units) in Cut Tape & Digi-Reel® format, suitable for high-volume production environments. SS5P10-M3/87A maintains Tape & Reel packaging with 12,990 units available.

Packaging Format Considerations: Tape & Reel (TR) packaging is standard for SS5P10HM3_A/H, SS5P10-M3/87A, SS5P10HM3_A/I, and SV5100_R2_00001. Cut Tape & Digi-Reel® format is available for SS5P10-M3/86A and PDS5100HQ-13, offering flexibility for lower-volume or mixed-component assembly operations.

Forward Voltage Performance: PDS5100HQ-13 exhibits lower forward voltage (710 mV @ 5 A) compared to the primary part (880 mV @ 5 A), resulting in reduced power dissipation. This characteristic is beneficial for thermal management in high-current applications. SV5100_R2_00001 provides near-equivalent forward voltage (870 mV @ 5 A).

Compliance and Regulatory Status: All substitute parts maintain ROHS3 compliance and REACH unaffected status, consistent with the primary part. Moisture Sensitivity Level (MSL) is 1 (Unlimited) across all variants, indicating no special moisture handling requirements.

Frequently Asked Questions (FAQ)

Q: Can SS5P10-M3/86A be used as a direct replacement for SS5P10HM3_A/H?

A: SS5P10-M3/86A is a parametric equivalent with identical electrical specifications (100 V, 5 A, 880 mV forward voltage, 15 µA reverse leakage). The primary difference is packaging format: SS5P10-M3/86A is supplied in Cut Tape & Digi-Reel® format while SS5P10HM3_A/H is supplied in Tape & Reel. Both use TO-277A (SMPC) surface mount packages. Substitution is valid provided the assembly process accommodates the alternative packaging format.

Q: Is PDS5100HQ-13 suitable for automotive applications?

A: Yes. PDS5100HQ-13 carries AEC-Q101 qualification and automotive-grade designation. It meets the 100 V / 5 A electrical requirements. The PowerDI™ 5 package differs from the TO-277A package of the primary part; PCB layout and assembly process compatibility must be confirmed before substitution.

Q: What is the significance of the lower forward voltage in PDS5100HQ-13?

A: PDS5100HQ-13 exhibits 710 mV forward voltage at 5 A compared to 880 mV for SS5P10HM3_A/H. This 170 mV difference reduces power dissipation in the diode during forward conduction. For applications sensitive to thermal performance, PDS5100HQ-13 provides improved efficiency. Circuit design must account for the lower forward voltage drop if voltage regulation or current limiting depends on the diode's forward voltage characteristic.

Q: Are there automotive qualification differences between the substitute parts?

A: SS5P10HM3_A/H, SS5P10HM3_A/I, and PDS5100HQ-13 all carry AEC-Q101 qualification. SS5P10-M3/86A, SS5P10-M3/87A, and SV5100_R2_00001 do not list automotive qualification. For designs requiring AEC-Q101 compliance, selection must be limited to the three qualified parts.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging supplies components on continuous carrier tape wound on a reel, suitable for automated pick-and-place assembly at high volumes. Cut Tape & Digi-Reel® format provides components on cut tape segments or alternative reel configurations, offering flexibility for lower-volume production or mixed-component assembly. Both formats use identical surface mount packages; the difference is in supply format and handling during assembly.

Q: Can SV5100_R2_00001 replace SS5P10HM3_A/H in automotive applications?

A: SV5100_R2_00001 does not carry AEC-Q101 qualification or automotive-grade designation. It is not suitable for applications requiring automotive qualification. For non-automotive applications, SV5100_R2_00001 provides electrical equivalence with 870 mV forward voltage and 15 µA reverse leakage, both within acceptable tolerance of the primary part.

Q: What is the operating temperature range difference between PDS5100HQ-13 and other substitutes?

A: PDS5100HQ-13 operates from -65°C to 175°C, compared to -55°C to 150°C for SS5P10HM3_A/H and most other substitutes. The extended range provides 10°C additional low-temperature capability and 25°C additional high-temperature capability. This extended range is beneficial for applications in extreme thermal environments.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed—SS5P10-M3/86A, SS5P10-M3/87A, SS5P10HM3_A/I, PDS5100HQ-13, and SV5100_R2_00001—are ROHS3 compliant and REACH unaffected, consistent with the primary part SS5P10HM3_A/H.

Q: What does Moisture Sensitivity Level (MSL) 1 mean?

A: MSL 1 (Unlimited) indicates that the component has unlimited shelf life and requires no special moisture handling or baking procedures prior to assembly. All listed parts carry MSL 1 rating, eliminating moisture-related assembly constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message