SS36L MTG Equivalent & Substitute Parts

Part Overview

The SS36L MTG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 60 V DC reverse voltage and 3 A average rectified current in a surface mount Sub SMA package (DO-219AB). This component is classified as Active product status and is RoHS3 compliant. Equivalent and substitute parts are identified to support design flexibility, inventory management, and supply chain continuity for applications requiring Schottky diode functionality within specified electrical and mechanical parameters.

Substiute Parts

SS36L MTG

Taiwan Semiconductor CorporationIn Stock: 900SS36L MTG Datasheet

Current PartRFQ

SS36L RVG

Taiwan Semiconductor CorporationIn Stock: 13624SS36L RVG Datasheet

Parametric EquivalentRFQ

SS1FH6-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 360489SS1FH6-M3/H Datasheet

SimilarRFQ

SS1FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 15439SS1FH6HM3/H Datasheet

SimilarRFQ

SS2FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 37523SS2FH6HM3/H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS36L MTG are classified into two categories based on electrical parameter alignment:

Parametric Equivalent: Parts that match all critical electrical specifications (voltage rating, current rating, forward voltage, reverse leakage, and recovery speed) and package configuration. These parts are direct functional replacements.

Similar Parts: Parts that share the same voltage rating (60 V) and package type (DO-219AB) but differ in current rating or reverse leakage characteristics. These parts are suitable for applications where the current requirement is lower than the main part specification or where enhanced leakage performance is acceptable.

The key parameters determining substitution eligibility are:

• Voltage - DC Reverse (Vr) (Max): 60 V (required match)
• Package / Case: DO-219AB (required match)
• Mounting Type: Surface Mount (required match)
• Technology: Schottky (required match)
• Current - Average Rectified (Io): 3 A (parametric equivalent) or lower (similar)
• Voltage - Forward (Vf) (Max) @ If: within acceptable range for application
• Current - Reverse Leakage @ Vr: within acceptable range for application

Parameter Comparison

Engineering Selection Recommendations

SS36L RVG (Parametric Equivalent)

The SS36L RVG is a direct parametric equivalent to the SS36L MTG. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications: 60 V reverse voltage, 3 A average rectified current, 750 mV forward voltage at 3 A, and 500 µA reverse leakage at 60 V. The primary difference is packaging format: SS36L RVG is supplied in Tape & Reel (TR) configuration, while SS36L MTG packaging is not specified. Both parts are Active status, RoHS3 compliant, and operate across -55°C to 150°C junction temperature range. Selection between these parts depends on packaging and supply requirements.

SS1FH6-M3/H (Similar Part - Lower Current Rating)

The SS1FH6-M3/H is manufactured by Vishay General Semiconductor - Diodes Division and shares the 60 V voltage rating and DO-219AB package with the SS36L MTG. This part is rated for 1 A average rectified current (versus 3 A for the main part) and exhibits superior reverse leakage performance (3 µA at 60 V versus 500 µA). Forward voltage is 700 mV at 1 A. This part is suitable for applications requiring lower current capacity and is part of the eSMP® series. Operating temperature range extends to 175°C. This part is Active status and RoHS3 compliant.

SS1FH6HM3/H (Similar Part - Lower Current Rating, Automotive Grade)

The SS1FH6HM3/H is manufactured by Vishay General Semiconductor - Diodes Division and is qualified to AEC-Q101 automotive standard. Electrical specifications match the SS1FH6-M3/H: 60 V reverse voltage, 1 A average rectified current, 700 mV forward voltage at 1 A, and 3 µA reverse leakage at 60 V. Package and mounting type are identical to the main part (DO-219AB, surface mount). Operating temperature range is -55°C to 175°C. This part is designated as Automotive grade and is suitable for applications requiring automotive-qualified components. Active status and RoHS3 compliant.

SS2FH6HM3/H (Similar Part - Intermediate Current Rating, Automotive Grade)

The SS2FH6HM3/H is manufactured by Vishay General Semiconductor - Diodes Division and is qualified to AEC-Q101 automotive standard. This part is rated for 2 A average rectified current (intermediate between 1 A and 3 A options), with 60 V reverse voltage, 780 mV forward voltage at 2 A, and 3 µA reverse leakage at 60 V. Package configuration is DO-219AB surface mount. Operating temperature range is -55°C to 175°C. This part is designated as Automotive grade and provides a current rating option between lower-rated and full-rated alternatives. Active status and RoHS3 compliant.

Frequently Asked Questions (FAQ)

Q: Can SS36L RVG be used as a direct replacement for SS36L MTG?

A: Yes. The SS36L RVG is a parametric equivalent with identical electrical specifications (60 V, 3 A, 750 mV forward voltage, 500 µA reverse leakage) and the same DO-219AB package. The difference is packaging format (Tape & Reel versus unspecified). Both are manufactured by Taiwan Semiconductor Corporation and are Active status, RoHS3 compliant components.

Q: Why do the Vishay parts (SS1FH6-M3/H, SS1FH6HM3/H, SS2FH6HM3/H) have lower reverse leakage than the main part?

A: Reverse leakage is a characteristic of the diode design and manufacturing process. The Vishay parts exhibit 3 µA reverse leakage at 60 V compared to 500 µA for the Taiwan Semiconductor parts. This is a material and process difference between manufacturers and does not affect substitution eligibility for applications where the main part's leakage specification is acceptable.

Q: Can I use SS1FH6-M3/H (1 A) in an application designed for SS36L MTG (3 A)?

A: No. The SS1FH6-M3/H is rated for 1 A average rectified current, while the SS36L MTG is rated for 3 A. Using a lower-rated part in a 3 A application will result in component failure or degraded performance. The SS1FH6-M3/H is suitable only for applications requiring 1 A or less.

Q: What is the difference between SS1FH6HM3/H and SS2FH6HM3/H?

A: Both parts are Vishay products qualified to AEC-Q101 automotive standard with 60 V reverse voltage and DO-219AB package. The primary difference is current rating: SS1FH6HM3/H is rated for 1 A, while SS2FH6HM3/H is rated for 2 A. Forward voltage also differs: 700 mV at 1 A versus 780 mV at 2 A. Selection depends on the application's current requirement.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed (SS36L MTG, SS36L RVG, SS1FH6-M3/H, SS1FH6HM3/H, SS2FH6HM3/H) are RoHS3 compliant and have Moisture Sensitivity Level 1 (Unlimited).

Q: Can I use automotive-qualified parts (SS1FH6HM3/H, SS2FH6HM3/H) in non-automotive applications?

A: Yes. Automotive-qualified parts meet or exceed the requirements of non-automotive applications. AEC-Q101 qualification indicates the parts have undergone additional testing and reliability screening. These parts are suitable for any application where the electrical specifications (voltage, current, package) are compatible.

Q: What is the operating temperature difference between the main part and substitute parts?

A: The SS36L MTG operates from -55°C to 150°C junction temperature. The Vishay substitute parts (SS1FH6-M3/H, SS1FH6HM3/H, SS2FH6HM3/H) operate from -55°C to 175°C. The extended upper temperature limit of Vishay parts provides additional thermal margin in high-temperature applications.

Q: Are all parts available in the same package configuration?

A: All parts use the DO-219AB package for surface mount applications. However, packaging format (bulk, Tape & Reel, etc.) may differ. SS36L RVG is specified as Tape & Reel. Verify packaging format with supplier documentation for procurement requirements.