SS36LHRVG Equivalent & Substitute Parts

Part Overview

The SS36LHRVG is a Schottky rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 60 V DC reverse voltage and 3 A average rectified current in a Sub SMA surface mount package. This component is classified as Active product status with AEC-Q101 automotive qualification and ROHS3 compliance. Equivalent and substitute parts are identified based on matching or compatible electrical and mechanical parameters within the Schottky diode rectifier category. Substitutes may be required due to inventory availability, packaging format preferences, or application-specific current rating requirements.

Substiute Parts

SS36LHRVG

Taiwan Semiconductor CorporationIn Stock: 874SS36LHRVG Datasheet

Current PartRFQ

SS36L RVG

Taiwan Semiconductor CorporationIn Stock: 13624SS36L RVG Datasheet

Parametric EquivalentRFQ

SS1FH6-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 360489SS1FH6-M3/H Datasheet

SimilarRFQ

SS1FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 15439SS1FH6HM3/H Datasheet

SimilarRFQ

SS2FH6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 37523SS2FH6HM3/H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SS36LHRVG is determined by the following critical parameters: voltage rating (60 V DC reverse), package type (DO-219AB / Sub SMA surface mount), technology (Schottky), and current rating capability. The substitute parts are grouped into two categories:

Parametric Equivalent: Parts with identical electrical specifications and packaging that differ only in packaging format (Tape & Reel versus individual packaging).

Similar Parts: Parts with the same voltage rating and package type but with reduced current ratings (1 A or 2 A versus 3 A). These parts maintain compatibility with the same physical footprint and voltage class but are suitable for applications requiring lower current capacity.

The key parameters determining substitution eligibility are:

• Voltage - DC Reverse (Vr) (Max): 60 V (required match)
• Package / Case: DO-219AB (required match)
• Mounting Type: Surface Mount (required match)
• Technology: Schottky (required match)
• Current - Average Rectified (Io): 3 A (parametric equivalent), 1 A or 2 A (similar)

Parameter Comparison

Engineering Selection Recommendations

SS36L RVG (Parametric Equivalent): This part is a direct parametric equivalent to the SS36LHRVG, manufactured by Taiwan Semiconductor Corporation with identical electrical specifications (60 V, 3 A, 750 mV forward voltage). The primary difference is packaging format (Tape & Reel). Both parts carry ROHS3 compliance and MSL 1 rating. Selection of SS36L RVG is appropriate when Tape & Reel packaging is preferred for automated assembly processes or when inventory of the original part number is unavailable.

SS1FH6HM3/H (Similar Part - 1 A Rating): This Vishay part maintains the 60 V voltage rating and DO-219AB package compatibility with AEC-Q101 automotive qualification. The current rating is reduced to 1 A. This part is suitable for applications where the circuit design requires only 1 A rectified current capacity. The extended operating temperature range (-55°C ~ 175°C) provides additional thermal margin compared to the main part.

SS2FH6HM3/H (Similar Part - 2 A Rating): This Vishay part maintains the 60 V voltage rating and DO-219AB package compatibility with AEC-Q101 automotive qualification. The current rating is 2 A, positioned between the 1 A and 3 A options. This part is suitable for applications requiring 2 A rectified current capacity. The extended operating temperature range (-55°C ~ 175°C) and automotive qualification align with the main part's grade requirements.

SS1FH6-M3/H (Similar Part - 1 A Rating, Non-Automotive): This Vishay part provides the same voltage rating and package compatibility but lacks automotive grade designation and AEC-Q101 qualification. Current rating is 1 A. This part is suitable only for non-automotive applications where the 1 A current capacity is sufficient and automotive qualification is not required.

Frequently Asked Questions (FAQ)

Q: Can SS36L RVG be used as a direct replacement for SS36LHRVG?

A: Yes. SS36L RVG is a parametric equivalent with identical electrical specifications (60 V, 3 A, 750 mV forward voltage) and the same DO-219AB package. The difference is packaging format (Tape & Reel versus individual packaging). Both parts are manufactured by Taiwan Semiconductor Corporation and carry ROHS3 compliance.

Q: What is the difference between the Taiwan Semiconductor Corporation parts and the Vishay parts?

A: The Taiwan Semiconductor Corporation parts (SS36LHRVG and SS36L RVG) are rated for 3 A rectified current with 500 µA reverse leakage at 60 V. The Vishay parts (SS1FH6-M3/H, SS1FH6HM3/H, SS2FH6HM3/H) have lower reverse leakage (3 µA at 60 V) and extended operating temperature ranges (-55°C ~ 175°C versus -55°C ~ 150°C). Vishay parts with "HM3" designation carry automotive grade and AEC-Q101 qualification.

Q: Can I use a 1 A or 2 A rated diode in place of the 3 A SS36LHRVG?

A: Substitution with lower current-rated parts (1 A or 2 A) is only appropriate if the circuit design requires current capacity at or below the substitute part's rating. The physical package (DO-219AB) and voltage rating (60 V) remain compatible. However, using an undersized current rating in a circuit designed for 3 A operation will result in diode failure or thermal stress.

Q: Are the Vishay SS1FH6-M3/H and SS1FH6HM3/H parts interchangeable?

A: Both parts have identical electrical specifications (60 V, 1 A, 700 mV forward voltage) and DO-219AB packaging. The key difference is that SS1FH6HM3/H carries automotive grade designation and AEC-Q101 qualification, while SS1FH6-M3/H does not. For automotive applications, SS1FH6HM3/H is the appropriate selection.

Q: What does the DO-219AB package designation mean?

A: DO-219AB is the standardized package case designation for surface mount Schottky diodes in the Sub SMA form factor. All substitute parts listed maintain this package compatibility, ensuring identical PCB footprint and mounting characteristics.

Q: Why do the Vishay parts have lower reverse leakage current (3 µA) compared to the Taiwan Semiconductor parts (500 µA)?

A: Reverse leakage current is a manufacturing characteristic that varies between manufacturers and product lines. The lower leakage in Vishay parts indicates different semiconductor process technology. Both values are within acceptable ranges for Schottky rectifier applications, but the lower leakage may provide performance advantages in high-impedance circuits.

Q: Can I use SS36L RVG in place of SS36LHRVG if my assembly process requires Tape & Reel packaging?

A: Yes. SS36L RVG is the parametric equivalent specifically designed for Tape & Reel packaging format. All electrical specifications and compliance certifications are identical to SS36LHRVG. The substitution is direct for automated assembly processes.

Q: What is the significance of AEC-Q101 qualification?

A: AEC-Q101 is the automotive electronics council qualification standard for discrete semiconductors. Parts carrying this qualification have undergone rigorous testing for reliability, temperature cycling, and performance stability in automotive environments. For automotive applications, AEC-Q101 qualified parts (SS36LHRVG, SS1FH6HM3/H, SS2FH6HM3/H) are required.