SS-33-10 Equivalent & Substitute Parts

Part Overview

The SS-33-10 is a 10 stud spade terminal connector manufactured by 3M, designed for crimp termination of 10-12 AWG wire. This component belongs to the Highland™ series and is classified as a spring snap terminal for free-hanging inline mounting applications. The part is currently active in production with 927 pieces in stock inventory. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, ensuring functional interchangeability in circuit applications requiring spade terminal connectors of this stud size and wire gauge rating.

Substiute Parts

SS-33-10

3MIn Stock: 947SS-33-10 Datasheet

Current PartRFQ

8262

Keystone ElectronicsIn Stock: 10318262 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SS-33-10 are qualified based on strict alignment of the following critical parameters:

• Terminal type classification (Spring, Snap)
• Stud size (10 Stud)
• Wire gauge range (10-12 AWG)
• Overall length (0.730" / 18.54mm)
• Outer edge width (0.320" / 8.13mm)
• Mounting configuration (Free Hanging, In-Line)
• Termination method (Crimp)
• Insulation status (Non-Insulated)

The Keystone Electronics part number 8262 meets all these core electrical and mechanical requirements, establishing it as a direct functional equivalent. Both parts are active products with current production status and comply with RoHS and REACH regulations.

Parameter Comparison

Engineering Selection Recommendations

Both the SS-33-10 and Keystone Electronics 8262 are active production components with full regulatory compliance. The SS-33-10 carries RoHS Compliant certification, while the 8262 meets the more recent ROHS3 Compliant standard. Both parts maintain REACH Unaffected status. Selection between these parts should be based on supply chain availability, as both meet identical electrical and mechanical specifications for 10-12 AWG spade terminal applications with 10 stud configuration. The Keystone Electronics part currently maintains higher inventory levels at 1012 pieces compared to 927 pieces for the 3M part.

Frequently Asked Questions (FAQ)

Q: What determines if a spade terminal connector is a suitable substitute for the SS-33-10?

A: Substitute parts must match the following parameters: 10 stud size, 10-12 AWG wire gauge rating, 0.730" overall length, 0.320" outer edge width, spring snap terminal type, free hanging inline mounting, crimp termination, and non-insulated configuration.

Q: Is the Keystone Electronics 8262 electrically equivalent to the SS-33-10?

A: Yes. Both parts share identical wire gauge ratings, stud size, terminal type, and crimp termination specifications. They are functionally interchangeable in applications requiring 10-12 AWG spade terminal connectors with 10 stud configuration.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 represents the current iteration of the Restriction of Hazardous Substances directive with updated substance restrictions. Both certifications indicate compliance with hazardous substance limitations; ROHS3 reflects the more recent regulatory framework.

Q: Are there packaging differences between these parts?

A: The SS-33-10 is supplied in bulk packaging. Packaging information for the Keystone Electronics 8262 is not specified in the available data.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided the design accommodates the specified mechanical dimensions (0.730" length, 0.320" width) and electrical requirements (10-12 AWG, 10 stud, crimp termination). Both parts maintain identical form factor and functional specifications.